JacobsParts Inc. LTCH-N3-BLU 16mm latching push button disconnect 250V 3A IP67 blue LED
16 mm latching push button with blue LED, 250 V 3 A, IP67 rated, 12 V LED, 1NO1NC SPDT contacts
- Amperage3 A
- Rated voltage250 V
- Product typePushbutton
- Main materialAluminum
- IP67 rated withstands heavy rain and splashes
- Latching action stays on until pressed again
- Blue LED indicates status with flexible wiring
- 250V 3A rating handles mains-level circuits
- 16mm panel cutout fits standard mounting holes
16mm IP67 latching push button
The JacobsParts LTCH-N3-BLU is a 16mm stainless steel latching push button switch rated for 250V AC/DC at 3A. Its IP67 enclosure withstands heavy rain and splashes, making it suitable for automotive, marine and outdoor electronics projects. The blue LED operates at 12V DC and 15mA, and can be wired to stay on constantly or only when the switch is activated.
Replaces momentary or non-sealed switches
Builders moving from momentary buttons or switches without an IP rating gain a maintained on-off action and verified water ingress protection. The upgrade is worth it when the application demands a tactile latching function that survives wet environments without additional sealing hardware.
Sustained load within rated limits
Under continuous operation the switch handles its full 3A rating at 250V while the LED draws a steady 15mA at 12V. The aluminum zinc alloy body and IP67 seal maintain performance across the -20C to 55C temperature range without derating during extended use.
How it compares
Measured against everything we stock in Push-Button & Disconnect Switches, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 80% of the 194 comparable items (median $19.49).
Specifications
| Product | |
|---|---|
| Brand name | JacobsParts |
| Model name | LTCH-N3-BLU |
| Product type | Pushbutton |
| Power | |
| Amperage | 3 A |
| Rated voltage | 250 V |
| Size & build | |
| Main material | Aluminum |
Questions about this item
What panel cut-out diameter does the 16 mm latching switch require?
Drill a 5/8 inch (16 mm) hole in the panel for the threaded neck to pass through.
How do I wire the blue LED so it lights only when the switch is on?
Connect the LED in parallel with the normally open contact pair using a 12 V DC supply; it will draw 15 mA when the circuit is closed.
What is the expected operating temperature range for the IP67-rated switch?
The switch is rated for continuous use from -20 °C to 55 °C.
More in Push-Button & Disconnect Switches
Similar items
JacobsParts Inc. LTCH-O4-BLU Momentary Pushbutton Disconnect 19mm IP67 250V 5A Blue LED
- 5 A
- 250 V
Telemecanique Sensors XSAV12801 Ac/Dc Proximity Motion Detector
JacobsParts Inc. LTCH-Q3-BLU 16mm IP67 250V 3A Blue LED Latching Disconnect
- 3 A
- 250 V
JacobsParts Inc. LTCH-I4-BLU Momentary Pushbutton Disconnect 19mm IP67 250V 5A Blue LED 12V
- 5 A
- 250 V





