JacobsParts MP1584 3.3V 3A DC Buck Converter 5pcs
Pack of five ultra-small buck modules that step 4.5-28V down to .8-20V at up to 3A peak
- Supply voltage28 V
- Product typeCurrent
- Compact 22x17mm module fits tight project spaces
- Adjustable 0.8-20V output powers diverse low-power devices
- Wide 4.5-28V input accepts varied power sources
- Up to 92% efficiency reduces waste heat
- 3A peak current handles demanding load spikes
Compact buck module for low-power projects
The JacobsParts MP1584 is a synchronous step-down converter measuring 22 by 17 by 4 mm. It accepts 4.5 to 28 V input and delivers an adjustable 0.8 to 20 V output, making it suited for LED lighting, micro-controller supplies and battery chargers. Five units are included in the pack.
Efficient operation with minimal heat and noise
Synchronous rectification enables up to 92 % efficiency depending on the input-to-output differential. The design generates little waste heat so the module runs cool and silent during typical low-current use. No-load ripple stays below 30 mV at a 1.0 MHz switching frequency.
Steady 1.5 A sustained output under load
The regulator handles 3 A peak current but is rated for 1.5 A continuous without exceeding thermal limits. Voltage is set via the onboard potentiometer and remains stable during extended operation. Reverse polarity and back-feeding must be avoided to prevent damage.
How it compares
Measured against everything we stock in Tech Gadgets & Accessories, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 97% of the 5,998 comparable items (median $24.99).
Specifications
| Product | |
|---|---|
| Product type | Current |
| Power | |
| Supply voltage | 28 V |
Questions about this item
How do I install the MP1584 buck module and what wiring mistake should I avoid?
Solder wires to the input and output pads, set the on-board potentiometer for the desired voltage between 0.8 and 20 V, and never apply reverse polarity or back-feed power through the module.
What maintenance or replacement will the MP1584 module need over time?
No scheduled maintenance is required; if the MP1584 IC or the potentiometer fails after prolonged use, replace the entire 22 x 17 mm module.
What is the first limit I will hit when running the MP1584 continuously at high load?
The sustained output current is capped at 1.5 A, so that thermal ceiling appears before the 3 A peak rating.
More in Tech Gadgets & Accessories
Similar items
Unique-Bargains 3×AAA to 18650 Adapter & Sleeve Set
- Battery Converter
Unique-Bargains Battery Storage Case Transparent for 2 x 18500/18650
- Gadgets
Unique-Bargains CR2032 CR2025 CR2016 Horizontal Battery Holder White 5 Pcs
- Battery Converter
- Battery Converter





