JacobsParts PST-A 10 Pack White Thermal Paste 0.6g
Ten single-use 0.6 g packets supply fresh white thermal compound for every CPU or GPU install
- Net content0.6g
- Thermal conductivityThermal Compound
- Key featuresSuitable for all CPU GPU LED
- One application per packet with 0.6g pre-measured dose
- Ten individual sachets eliminate dried-out tubes and waste
- White compound rated for CPU GPU LED heatsink use
- Single-use packets avoid messy syringes and cleanup
- Soft pak packaging keeps each portion fresh until needed
Pack Contents
The JacobsParts PST-A pack contains ten individual soft-pak sachets of white thermal compound. Each sachet holds 0.6 g of paste, intended for a single application on a CPU, GPU or LED heatsink. The pre-measured portions avoid the waste and drying-out common with larger tubes or syringes.
Capacity and Headroom
One 0.6 g sachet covers a typical desktop processor or graphics die with a thin, even layer. The ten-pack quantity supports multiple builds or reapplies over time without opening a bulk container. Very large server heatsinks or multi-die packages may need more than one sachet for full coverage.
Build and Daily Use
The soft-pak packaging keeps each portion sealed until use, so the compound stays fresh and uncontaminated. Application is straightforward: open a sachet, spread the paste onto the heatsink base, then discard the empty packet. No syringes, caps or cleanup tools are required.
How it compares
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 92% of the 498 comparable items (median $12.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | JacobsParts |
| Model name | PST-A |
| Performance | |
| Thermal conductivity | Thermal Compound |
| Size & build | |
| Net content | 0.6g |
Questions about this item
Will the .6 g packets cover the larger die on my older CPU without running short?
Each .6 g packet is sized for one application and works with CPU, GPU and LED heatsinks, so it should cover an older processor die.
How can I verify the paste is spreading correctly after I mount the cooler?
Remove the cooler after first tightening and check for a thin, even layer across the entire die with no voids or excess squeezing out the edges.
Does the 10 pack include any applicator tools or cleaning wipes?
The pack contains ten individual .6 g soft-pak sachets only; no spreader, syringe or cleaning wipes are supplied.
More in Thermal Paste
Similar items
ARCTIC COOLING MX-4 ACTCP00024A thermal paste 45g 8.5 W/mK
- 45g
- 8.5 W/mK
Prolimatech PRO-PK2-1.5G thermal paste 1.5g
- Material Specificat…
- Excellent long-term…





