Jadaol USB-C/USB-A to Ethernet Cable 10 ft

Dual USB-C and USB-A Connector

This cable combines a USB-C plug with a built-in USB-A adapter so one lead serves laptops, tablets and desktops without carrying a separate dongle. It provides a wired RJ45 link for devices that lack a native Ethernet port or have a damaged one. The ten-foot length reaches from a router across a typical desk or meeting-room table. Buyers whose hardware only supports slower USB 2.0 speeds will not reach the rated gigabit throughput.

Plug-and-Play With Possible Driver Step

Connect the USB end to the host and the RJ45 end to a router, modem or switch for an immediate wired link on most Windows, macOS, ChromeOS and Linux machines. Some systems still require a driver download before the adapter enumerates, so allow a few minutes for that install. The aluminium housing and reinforced strain relief survive repeated insertion, while the nylon-braided jacket resists kinks when the cable is coiled for travel. Users who expect zero configuration on every device may encounter a brief setup delay.

Check Port Type And OTG Support Before Buying

Verify that your device offers a USB-C or USB-A port capable of data transfer; charging-only ports will not pass Ethernet traffic. Mobile phones and tablets additionally need OTG and Ethernet support in their operating system, and performance may be limited by the device hardware. The cable draws power from the host port, so a bus-powered hub with insufficient current margin could cause dropouts. Buyers needing Power Delivery pass-through or multiple simultaneous USB peripherals should look for a powered dock instead.