Jamiikury 3PCS M5 Eye & Eye Turnbuckle 304 Stainless Steel

M5 Eye & Eye Turnbuckle Kit

This set contains three M5 eye-and-eye turnbuckles made from 304 stainless steel. Each piece has a thread diameter of 5 mm and a body inside length of 73 mm. They are designed for tensioning wire rope, chain or cable in architectural, marine and general rigging tasks.

Suits light-duty rigging and fixed anchor points

The closed-loop eyes on both ends give a secure attachment where hooks could detach. Builders needing a working load above 55 kg or a thread size larger than M5 should look at heavier hardware. The kit is not intended for lifting people or dynamic shock loads.

Working load limit 55 kg per turnbuckle

Each turnbuckle is rated at 125 lbs or 55 kg working load limit. The adjustable length ranges from 124 mm minimum to 170 mm maximum. This single figure determines whether the hardware matches the tension requirement of your project.