We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black aluminium box with HDMI in and out, USB 3.2 port and 3.5 mm audio jacks

Jansicotek

Jansicotek OZC10 4K60 USB 3.2 HDMI video capturing device

SKU CH-0MQT-K5B70

Captures 4K 60fps HDMI video with 1080p 240Hz or 1440p 144Hz pass-through, 3.5mm audio I/O and ultra-low latency over USB 3.2

  • Interface typeUSB 3.2
  • Supported resolutions4K
  • Video resolutionUp to 4K Video
  • HDMI ports1 Input/1 Output
  • USB connection1
  • Variant4K
  • Capture 4K 60 fps gameplay with USB 3.2 speed
  • Loop-out passes 4K 60 Hz HDR to your display
  • Record 1080p 240 Hz or 1440p 144 Hz high-frame-rate sources
  • 5 mm mic in and headphone out for live commentary
  • Plug-and-play with OBS on PC or Mac

Jansicotek OZC10 4K60 USB 3.2 capture

The Jansicotek OZC10 is a USB 3.2 video capturing device that accepts a 4K HDMI source and passes it through at 4K 60 Hz while recording. It suits streamers, gamers and conferencing users who need simultaneous capture and loop-out on PC or Mac. A 3.5 mm microphone input and headphone output let you mix live commentary with game audio in one take.

Install in seconds, watch for HDCP

Plug the box into a USB 3.2 port, connect the source to the HDMI input and the display to the HDMI output; no driver installation is required for OBS and similar software. The aluminium enclosure runs warm under sustained 4K 60 Hz loads, so keep ventilation clear. HDCP-protected content from consoles or media players will block the signal, and the single USB 3.2 link cannot sustain 4K capture if the host port negotiates at USB 2.0 speeds.

For single-source 4K 60 Hz workflows

Creators recording one HDMI device at 4K 60 Hz with live commentary will find the pass-through and audio mixing convenient. Builders who need multi-camera switching, internal PCIe capture, 4K capture above 60 Hz or 8K resolution should look at something else. The single USB 3.2 connection also limits users whose laptops lack a full-bandwidth USB 3.2 Type-A or Type-C port.

How it compares

Measured against everything we stock in Video Capture Cards & Boxes, at today’s prices. Recalculated every night.

Price $66.99
Pricier than about 66% of the 987 comparable items (median $43.99).

Specifications

Product
Brand nameJansicotek
Product lineOZC10
Model nameOZC10
Product colorBlack
Display
Supported resolutions4K
Audio & video
Video resolutionUp to 4K Video
Ports & slots
Interface typeUSB 3.2
HDMI ports1 Input/1 Output
USB connection1
More details
Variant4K

Questions about this item

How can I confirm the OZC10 is capturing 4K60 video correctly after connecting it?

Open your recording software and verify the preview shows 4K at 60 fps with HDR 12-bit colour depth; the HDMI 2.0 loop-out should simultaneously pass 4K60 HDR or 1080P 240Hz to your display without visible latency.

What cables and accessories are included with the OZC10, and what must I provide?

The box contains the capture unit with HDMI input, HDMI output, USB 3.2 port and 3.5 mm audio in/out jacks; you must supply an HDMI 2.0 cable for the source, a second HDMI cable for the pass-through display, and a USB 3.2 cable to the host.

The listing mentions a single OZC10 model — are there different capacity or version options to choose from?

Only the OZC10 series is offered; it captures up to 4K60, passes through 1440P 144Hz or 1080P 240Hz, supports HDR and VRR, and includes 3.5 mm audio I/O — no alternate capacities or versions exist.

More in Video Capture Cards & Boxes

Similar items