Jansicotek PD100W USB 3.2 Gen 2x2 cable 1.6 ft 20Gbps 100W 4K 60Hz

Right-angle USB-C cable for tight ports

This Jansicotek PD100W cable uses a 90-degree USB-C to USB-C connector so it sits flush against laptops, tablets or phones where a straight plug would block adjacent ports or hang over a desk edge. It is built for users who charge and move data at the same time in cramped setups such as docked workstations, car mounts or presentation rigs. The 1.6 ft length keeps slack to a minimum without straining the port.

20 Gbps USB 3.2 Gen 2x2 rating decides fit

The single spec that determines whether this cable matches your workflow is the 20 Gbps USB 3.2 Gen 2x2 data rate. Only hosts and peripherals that also support Gen 2x2 will reach that throughput; devices limited to 10 Gbps or 5 Gbps will fall back to their own maximum. An integrated E-Marker chip negotiates the link so the cable never becomes the bottleneck.

Passive thermals and 100 W power delivery

No active cooling is present — heat dissipates through the cable jacket during 100 W Power Delivery charging at 20 V / 5 A. In typical use the assembly remains warm to the touch but not hot, and there is no fan or pump noise. The same conductors carry 4K 60 Hz video with HDR 10-bit colour, so one cable handles charge, data and display without extra adapters.