Jansicotek Upgraded PH2 Phone Mount White 12.9in 235° 5.5in
Foldable desktop cradle adjusts from 3.74 to 5.5 inches high and tilts 0–235° for phones and tablets up to 12.9 inches, with a charging cutout and non-slip base
- Compatible phone brandsUniversal
- Compatible phone modelsGalaxy S22 Ultra
- Product typeDesktop Mount
- Product colorWhite
- DetailsWide Compability: all 4-12.9 in Cell Phone, Smartphone, iPad
- Key featuresCharging Hole Design The charging hole of the holder, which
- Adjust viewing angle from 0° to 235° for ergonomic comfort
- Extend height up to 5.5 inches to suit your desk setup
- Fold into a compact size for easy portability
- Charge device through reserved hole without removing it
- Non-slip rubber pads keep phone stable on any surface
Universal Desktop Phone Mount
The Jansicotek Upgraded PH2 is a foldable desktop mount finished in white. It holds any smartphone or tablet measuring 4 to 12.9 inches, including cased devices. Adjustable screw shafts allow the height to be set between 3.74 and 5.5 inches and the viewing angle to be positioned from 0° to 235°. A low centre of gravity and non‑skid rubber pads keep the device stable during touch‑screen use. A reserved charging hole lets you power the device while it remains in the cradle.
For Desk Users Who Need Flexible Viewing
This stand suits anyone who watches video, joins video calls, follows recipes or reads at a desk and wants a single holder for phones and larger tablets. The wide angle range and height extension support both upright and near‑flat positions. Buyers who need a mount that clamps to a monitor edge, attaches to a car vent or sticks to a dashboard should look at a different product type. The holder is designed for stationary desktop use only and does not offer magnetic or adhesive mounting options.
Adjustable Angle Range 0° to 235°
The defining specification is the adjustable angle range of 0° to 235°, set by hand via four screw shafts. This span covers vertical viewing, horizontal layout and almost any intermediate tilt for reading or filming. If your workflow requires a fixed single angle or a mount that locks into a specific detent, this continuously adjustable mechanism may be more complex than necessary.
How it compares
Measured against everything we stock in Phone Stands, Mounts & Grips, at today’s prices. Recalculated every night.
- Price $16.99
- Cheaper than about 70% of the 1,932 comparable items (median $22.99).
Specifications
| Product | |
|---|---|
| Brand name | Jansicotek |
| Product line | Upgraded PH2 |
| Model name | Upgraded PH2 |
| Product type | Desktop Mount |
| Product color | White |
| Compatibility | |
| Compatible phone brands | Universal |
| Compatible phone models | Galaxy S22 Ultra |
Questions about this item
How do I set the 3.74"–5.5" height range and 0°–235° angle, and which step do people skip?
Loosen the four screw shafts, raise or lower the arm to the desired height, tilt to the needed angle, then tighten all four shafts; the step most users skip is re-tightening every shaft, so the stand slips under the device's weight.
What part will need replacement first with daily desk use?
The non-skid rubber pads on the front hook and base wear smooth over time; when they lose grip the phone can slide, so keep spare adhesive-backed pads handy.
At what point does the 235° hinge stop holding position during long video sessions?
When the arm is extended near the 5.5" maximum and tilted past roughly 90°, the leverage can overcome the screw-shaft friction, causing gradual droop unless all four shafts are firmly clamped.
More in Phone Stands, Mounts & Grips
Similar items
HyperGear TECHcessories Sand Beige Crossbody Phone Strap 29-58
- Universal
- Universal
Lamicall Samsung Gala White Phone Mount DP13-EU-W 11.5cm Foldable
- Apple
- Foldable
Dogary DOGSJZJ3220BL-1PC phone mount, dashboard, rotatable, black
- Universal
- Universal





