We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black USB 3.0 A-to-A male cables, each 1.6 ft long

Jansicotek

Jansicotek USBAM2M USB 3.0 A to A Male Cable 1.6Ft 3-Pack

SKU CH-Q4ET-X3YPH

Three-pack of 1.6 ft USB 3.0 Type A male-to-male cables supporting 5 Gbps transfer for hard-drive enclosures, coolers and peripherals

  • Rated speed5 Gbit/s
  • Connection typeUSB A to USB A
  • Connector genderMale to Male
  • Product typeUSB 3.0
  • Product colorBlack
  • DetailsConnector 1: USB 3.0 Type A Male Connector 2: USB 3.0 Type A

Cable Length 1.64 Feet

Style USB 3.0 A Male to A Male

  • Transfers data at up to 5 Gbps with SuperSpeed USB 3.0
  • Works straight out of the box with no driver installation required
  • Connects USB 3.0 Type A peripherals to computers and hubs
  • Backwards compatible with USB 2.0 and USB 1.1 devices
  • Nickel-plated connectors and moulded joints resist corrosion and interference

USB 3.0 A-to-A cable for peripherals

This 1.6 ft Jansicotek cable carries a USB 3.0 Type-A male connector at each end and is sold as a three-pack. It links compatible hard-drive enclosures, laptop coolers, cameras, DVD players and similar SuperSpeed devices to a computer or hub without requiring any driver installation. The male-to-male layout is intended for equipment that presents a female Type-A port rather than the more common Type-B or Micro-B variants.

Passive copper link with 5 Gbps rating

The cord is rated for SuperSpeed USB 3.0 data transfer up to 5 Gbps and remains backwards compatible with USB 2.0 and USB 1.1 hosts. Nickel-plated connectors and moulded strain relief are designed to resist corrosion and minimise signal interference during normal desktop use. As a passive cable it draws no external power and adds negligible thermal load to the connected devices.

Extends reach inside a build

Each 1.6 ft length bridges short gaps between a motherboard or hub port and a peripheral mounted in a drive bay, on a desk or behind a monitor. The Type-A to Type-A gender means it cannot connect two host controllers directly, so it suits device-to-host links only. The three-pack lets you equip several enclosures or cooling pads at once while keeping cable runs tidy.

How it compares

Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 84% of the 15,227 comparable items (median $14.99).

Specifications

Product
Brand nameJansicotek
Model nameUSBAM2M
Product typeUSB 3.0
Product colorBlack
Performance
Rated speed5 Gbit/s
Ports & slots
Connection typeUSB A to USB A
Connector genderMale to Male

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 1.6 ft USB 3.0 A-to-A male cable, and what step is commonly missed?

Plug each USB 3.0 Type A male connector into a matching USB 3.0 Type A port on the host and the peripheral; the step often missed is confirming both ports are USB 3.0 (blue inserts) so the link negotiates 5 Gbps instead of falling back to USB 2.0 speeds.

What maintenance or replacement will the 3-pack of USB 3.0 male-to-male cables need over time?

Inspect the nickel-plated connectors and moulded strain relief periodically; replace any cable that shows bent pins, cracked insulation or intermittent 5 Gbps transfer, as the connectors are not serviceable.

What limit appears first when the USB 3.0 A-to-A cable runs sustained transfers at 5 Gbps?

The 1.6 ft length keeps signal loss low, so the first limit is usually the host controller or the attached device's sustained throughput ceiling rather than the cable itself.

More in USB Cords & Extension Cables

Similar items