Juno Lighting Trac-Lites Track Section 8 ft White 120V 20A 400W 91in
An 8 ft single-circuit track section rated for 120 V, 20 A and 400 W, measuring 91 in long in white aluminum
- Main materialHAWA
- Single-circuit simplicity keeps wiring clean
- 8 ft nominal length spans long runs
- 120 V AC rating matches standard power
- 20 A capacity supports heavy loads
- 400 W maximum handles bright layouts
Single-circuit 8 ft track section
This Juno Trac-Lites track section provides an eight-foot, single-circuit aluminium rail in white. It operates at 120 V AC and supports a maximum load of 400 W at 20 A. The extruded profile measures 91 7/8 inches long by 1 3/8 inches wide and 1/2 inch high.
Installers running one switching zone
Electricians and lighting designers who need a single continuous run with one control zone will find this section matches the spec. Projects that require multi-circuit switching or a different voltage supply cannot use this track.
120 V AC single-circuit rating
The track is rated for 120 V AC on a single 20 A circuit with a 400 W total limit. This electrical rating determines whether the section is compatible with the intended branch circuit and fixture load.
How it compares
Measured against everything we stock in Passive Components & Solder Supplies, at today’s prices. Recalculated every night.
- Price $50.99
- Pricier than about 74% of the 265 comparable items (median $9.99).
Specifications
| Product | |
|---|---|
| Brand name | Juno Lighting Group - Juno Trac-Lites |
| Product type | Other |
| Size & build | |
| Main material | HAWA |
Questions about this item
Should I pick the 8 ft white track or a different length for a single 120V circuit?
The 8 ft section is rated for 120V AC, 20 A and 400 W on one circuit, so choose it when your run matches the 91 in length and your load stays within those limits.
What does the 400 W rating mean once the track is installed?
It is the maximum total wattage the single circuit can carry at 120 V, so the combined draw of all attached fixtures must not exceed 400 W.
How does the 120 V single-circuit design limit what I can connect?
The track accepts only 120 V AC fixtures on one circuit, capped at 20 A and 400 W total, so all heads share the same switching and dimming control.
More in Passive Components & Solder Supplies
Similar items
WUQ 525STID-PWD Plastic Transom Mount 600W 10 pin Multisensor passive component
Bazarc 61-key mechanical keyboard 3000mAh RGB three-mode wireless 292x102x32mm
Bazarc Probes Adapters for in-circuit ECU Work with Iprog+ Programmer and Xprog
- Potentiometers, Tri…





