Kastar 3-Pack PS4 Battery Replacement 2000mAh 7.4Wh 3.7V
Three 3.7 V lithium-ion packs rated 2000 mAh and 7.4 Wh replace Sony LIP1522/KCR1410 cells in PS4 DualShock V1 and V2 controllers
- Total capacity7.4 Wh
- Pack contents3 Batteries
- Battery chemistryLi-Ion
- Product typeBattery
- Product dimensions3 × 2 × 3 in
- Key featuresHigh Capacity and Manufacture Price.
- Three-pack keeps spare controllers ready
- 2000 mAh cells extend play sessions
- 7 V lithium-ion matches original voltage
- Built-in protection circuits guard against over-charge and over-heat
- Meets UL 1642 and CE safety standards
Compatible Controllers
This three-pack replaces the internal power cell in Sony PlayStation 4 DualShock 4 controllers. It fits both first-generation V1 models such as CUH-ZCT1E and second-generation V2 models such as CUH-ZCT2U. Each cell is a direct substitute for the original Sony LIP1522 or KCR1410 part.
Capacity Upgrade
The lithium-ion cells deliver 2000 mAh at 3.7 V for 7.4 Wh of energy. That capacity exceeds many low-cost alternatives and extends play sessions between charges. The upgrade is worthwhile when the original pack no longer holds a full day of use or when a spare set is needed for multiplayer evenings.
Simple Swap
Installation requires opening the controller shell and disconnecting the old pack, then connecting the new one in its place. No soldering is involved. The most common issue is damaging the fragile ribbon cable or misaligning the connector during reassembly. Built-in protection circuits guard against over-charge, over-discharge, over-voltage, over-current and over-heating.
How it compares
Measured against everything we stock in Camera Batteries, Grips & Chargers, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 75% of the 5,900 comparable items (median $17.99).
Specifications
| Product | |
|---|---|
| Brand name | Kastar |
| Model name | PS4 |
| Part number | BA-3B-PS4-A |
| Total capacity | 7.4 Wh |
| Product type | Battery |
| Power | |
| Battery chemistry | Li-Ion |
| Size & build | |
| Product dimensions | 3 × 2 × 3 in |
| In the box | |
| Pack contents | 3 Batteries |
Other versions of this model
5 more in the same range
Kastar LI-42B 2-Pack 3.7V 1400mAh Li-Ion camera battery
- 2 Batteries
- Li-Ion
Kastar FNP120 camera battery 2300mAh 3.7V 8.51Wh for Brother DS820W DS920DW
- 1 Battery
- Li-Ion
Questions about this item
Will this 3.7 V 2000 mAh pack fit inside my DualShock 4 V1 or V2 without modification?
Yes — the three cells match the original Sony LIP1522/KCR1410 form factor for CUH-ZCT1 and CUH-ZCT2 series controllers.
Which screw or clip do I remove first when swapping the old cell for one of these?
Remove the four Phillips screws on the controller back shell, then gently lift the battery connector before pulling the original pack out.
How many charge cycles can I expect before capacity drops noticeably on these Li-Ion cells?
The built-in protection circuit supports UL1642 and CE safety limits, typically delivering several hundred full cycles before significant fade.
More in Camera Batteries, Grips & Chargers
Similar items
Kastar NP-BX1 2 Battery LCD Triple USB Charger Kit
- 1 Charger + 2 Batte…
- Li-Ion
Ultimaxx LP-E17 Battery & Charger for Canon EOS Rebel M6 M5 M3 T7i T6i T6s 750D SL2 SL3
- Battery & Charger










