NVIDIA Jetson AGX Orin 64GB Development Board 945137300050000
- 12-core Arm Cortex-…
- 64 GB 256-bit LPDDR…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Four USB-C to TTL serial adapters with FT232RL chip, 3.3V or 5.5V operation and 500mA self-restore fuse
This set contains four FR232RL modules that convert a USB-C port to a 3.3 V or 5.5 V TTL serial link. Each board uses an integrated FT232R chip with a built-in 500 mA self-restoring fuse. The red PCBs expose DTR, RXD, TXD, VCC, CTS and GND pins on a 2.54 mm pitch for breadboard use.
Verify that your target microcontroller runs at 3.3 V or 5 V logic to match the adapter’s selectable supply. The driver package supports Windows 95 through Windows 7 in both 32-bit and 64-bit editions but does not support Windows 8. Confirm your development machine runs a compatible operating system before ordering.
The FT232R integrates the oscillator, EEPROM and USB termination resistors, so the module draws minimal power and produces no audible noise. The on-board 500 mA fuse limits current during a short circuit and resets automatically once the fault clears. In normal use the board runs cool without a heatsink or fan.
Measured against everything we stock in Single-Board Computers & Dev Kits, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | AITRIP |
| Model name | FR232RL |
The box contains four FR232RL red Type‑C to TTL adapter modules. No additional parts are required for basic UART use; the FT232R chip integrates the oscillator, EEPROM and USB matching resistors.
Each module can be powered from the USB port at either 3.3 V or 5 V. Select the voltage that matches your target board — 3.3 V for 3.3 V logic devices, 5 V for 5 V logic — using the on‑board jumper or solder bridge.
The built‑in 500 mA polyfuse limits current drawn from the host USB port. If a short or overload occurs on the VCC pin, the fuse trips and automatically resets once the fault is cleared, protecting the laptop port.
More in Single-Board Computers & Dev Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?