We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four small black rectangular PoE splitter adapters with Ethernet ports and 5.5mm DC jacks

KINGARD

KINGARD 4-Pack PoE Splitter 12V 1.5A 18W IEEE 802.3af 10/100Mbps

SKU CH-XXN7-4ZG0K

Four PoE splitters convert 44-54V input to 12V 1.5A for non-PoE cameras, phones and access points at 100Mbps

  • Product typeAccessories
  • Powers 12V non-PoE devices via standard IEEE 802.3af PoE
  • Delivers up to 18W at 12V 1.5A from 44-54V PoE input
  • Maintains 10/100Mbps data while supplying power through single cable
  • Includes 5.5mm x 2.1mm DC jack for direct 12V device connection
  • Four splitters in one pack for multiple IP camera or access point installs

Four-pack PoE splitters for 12 V devices

This four-pack supplies DC 12 V at up to 1.5 A to non-PoE equipment such as IP cameras, VoIP phones or wireless access points. Each unit draws 44–54 V from an IEEE 802.3af source and delivers a maximum of 18 W through a 5.5 × 2.1 mm barrel jack. The kit is intended for installers who need to power several 12 V endpoints from a single PoE switch or injector.

Plug-and-play installation with polarity care

Connect the PoE input to the network cable coming from the switch, then attach the DC plug to the device’s power socket; no software configuration is required. The most common issue is reversing the barrel connector polarity, so verify the centre-positive marking before powering on. Ensure the source port actually provides 802.3af power, otherwise the splitter will stay inactive.

100 Mbps data pass-through and 18 W ceiling

The splitter passes Ethernet at 10/100 Mbps, so Gigabit links will fall back to Fast Ethernet speeds. Total output is capped at 18 W, meaning devices that draw more current than 1.5 A at 12 V cannot be supported. The 44–54 V input range also excludes passive PoE injectors that operate outside the 802.3af specification.

How it compares

Measured against everything we stock in Wi-Fi Cards & USB Adapters, at today’s prices. Recalculated every night.

Price $42.99
Pricier than about 83% of the 1,565 comparable items (median $18.99).

Specifications

Product
Product typeAccessories

Questions about this item

How can I confirm each splitter is delivering 12V 1.5A to my IP camera after installation?

Measure the DC jack with a multimeter; it should read 12V while the camera powers on and streams at 100Mbps.

The pack contains four splitters — do I need separate Ethernet cables or a PoE switch to use them?

Yes, each unit requires a Cat5e or better cable from a PoE switch or injector supplying 44-54V; cables and switch are not included.

My devices need 12V 1A and 12V 2A — which of the four identical splitters should I assign to each?

All four splitters are identical 18W max units; use any splitter for the 1A device, but the 2A device exceeds the 1.5A limit so it cannot be powered safely.

More in Wi-Fi Cards & USB Adapters

Similar items