Kingston Technology Corp. KSM56R46BD4PMI-64MDI 64GB DDR5 5600 CL46 Registered Server RAM
- 64 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 96 GB DDR5-5600 registered ECC RDIMM with CL46 latency for high-capacity server workloads
Capacity 96GB
Rank 2Rx4
Model Micron, Full Lock
This 96GB DDR5-5600 CL46 ECC Registered RDIMM uses Micron components in a 2Rx4 layout. It runs at 5600 MHz with 46-45-45 timings at 1.10V on a 288-pin interface. The module targets enterprise servers and workstations that require high-capacity, error-correcting memory for virtualisation, databases or compute clusters.
Buyers whose systems accept only unbuffered UDIMMs cannot use this module. Builds limited to lower single-module capacities should look at smaller RDIMMs. Workstations without ECC support in the CPU or chipset will not benefit from the error-correction feature.
Align the key notch with the slot and press until the latches click; no heat spreader means tight clearance is rarely an issue. Common problems include mixing registered and unbuffered DIMMs, populating slots in the wrong order for the memory controller, or running the module on a board that does not support DDR5-5600 registered operation.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Kingston |
| Model name | KSM56R46BD4PMI-96MBI |
| Total capacity | 96 GB |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 5600 (PC5 44800) |
| Processor | |
| Chipset | Micron Chipset |
| Memory | |
| CAS latency | CL46 |
| Memory timings | 46-45-45 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
| Size & build | |
| Shipping weight | 0.14 kg |
| Package size | 142 × 43 × 8 mm |
Other versions of this model
The module is a 288-pin DDR5 RDIMM rated for DDR5-5600 (PC5-44800) at 1.10 V. It requires a DDR5-compatible motherboard with registered-DIMM support and ECC enabled in the BIOS.
Mixing speeds will force all modules to run at the lowest common speed and timing; the 5600 MHz module will downclock to match 4800 MHz, and registered/ECC settings must be identical across every slot.
Check the BIOS memory-info screen or a tool such as CPU-Z: it should show DDR5-5600, CAS 46, timings 46-45-45, voltage 1.10 V, ECC active and registered mode enabled.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?