Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1GB DDR 333 PC 2700 CL2.5 184-pin unbuffered memory module for system upgrades
This 1GB DDR SDRAM module runs at 333 MHz with a PC 2700 rating and CL2.5 latency. It uses the 184-pin form factor and operates at 2.50V without ECC or registered buffering. The stick is aimed at owners of legacy desktops or workstations that require this specific DDR generation for maintenance or modest capacity upgrades.
The module has no heat spreader and draws power at the standard 2.50V for DDR 333. Passive cooling relies on case airflow, so silent operation is typical in a properly ventilated chassis. Power consumption remains low and consistent with the DDR specification for this speed grade.
The unbuffered 184-pin design fits motherboards built for DDR 333 memory. Adding this single 1GB stick frees remaining slots for additional modules of the same type. Systems needing ECC, registered memory, higher capacities per module or faster DDR speeds cannot use this part.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Kingston |
| Product line | ValueRAM |
| Model name | KVR333 × 64C25/1G |
| Total capacity | 1 GB |
| Product type | 184-Pin DDR SDRAM |
| Performance | |
| Rated speed | DDR 333 (PC 2700) |
| Memory | |
| CAS latency | CL2.5 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Power | |
| Rated voltage | 2.5 V |
| Size & build | |
| Shipping weight | 0.09 kg |
| Package size | 170 × 56 × 15 mm |
Align the notch on the module with the key in the 184-pin slot, press down firmly until both retention clips click into place, and verify the system detects the full 1GB at DDR 333 speed.
No scheduled maintenance is required; keep the contacts clean and ensure the motherboard supplies a steady 2.50V. Replace the module only if memory errors appear or capacity becomes insufficient.
The CAS latency of CL2.5 at DDR 333 sets the timing boundary; sustained workloads will hit this latency limit before bandwidth or voltage constraints become an issue.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?