KISSLER AND CO., INC. 1/4-Turn Angle Stop Valve 1/2 In FNPT x 1/2 In Slip 88-9235
Quarter-turn angle stop valve with 1/2 inch FNPT inlet and 1/2 inch slip outlet, rated to 125 psi and 40 to 180 degrees F
- Main materialHAWA
- Quarter-turn operation for fast shut-off
- Chrome-plated brass resists corrosion
- Rated 125 psi for reliable supply lines
- Operates 40 to 180 °F for hot and cold use
- IAPMO/UPC listed for code compliance
Quarter-Turn Angle Stop Valve
The Kissler & Co 1/4-turn angle stop valve controls water supply to fixtures using a quarter-turn handle. It features a brass body with chrome-plated finish and chrome-plated brass stem and handle components. The valve connects a 1/2 inch FNPT inlet to a 1/2 inch slip outlet for supply line attachment.
Residential and Light Commercial Plumbing
This valve suits installers needing a listed quarter-turn stop for standard fixture supply connections where 1/2 inch FNPT and slip connections match the piping. It is not for systems exceeding 125 psi operating pressure or temperatures outside the 40 to 180 degrees F range. Installers requiring different connection types such as compression or PEX ends should select an alternative model.
IAPMO/UPC/SA Listed Standard
The valve carries IAPMO/UPC/SA listing confirming compliance with applicable plumbing standards for potable water supply stops. This listing is the primary specification that determines whether the part meets local code requirements for the installation. Always verify that the listing satisfies the specific code authority governing the project.
How it compares
Measured against everything we stock in Plumbing Valves & Valve Assemblies, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 93% of the 720 comparable items (median $47.49).
Specifications
| Product | |
|---|---|
| Brand name | Kissler & Co |
| Size & build | |
| Main material | HAWA |
Questions about this item
What pipe size and thread type does the 1/2 in FNPT inlet on this 88-9235 valve require?
The inlet accepts a 1/2 inch female NPT threaded pipe or adapter; the outlet is a 1/2 inch slip connection for copper tubing.
Will the chrome-plated brass handle and stem on this angle stop operate smoothly against older brass supply lines?
Yes, the chrome-plated brass stem and handle are designed for quarter-turn operation and are compatible with existing 1/2 inch brass or copper supply lines.
How can I confirm the 88-9235 valve is functioning correctly after installation?
Turn the handle a full quarter turn to open and close; verify no leaks at 125 psi maximum pressure and that water flows freely between 40 and 180 degrees F.
More in Plumbing Valves & Valve Assemblies
