We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small 4.3 inch IPS touchscreen with ribbon cables and mounting hardware

KW-Commerce

KW-Commerce 4.3" IPS Touchscreen 800x480 MIPI DSI 2 in 1 accessory

SKU CH-Q3FB-R0C4M

4.3-inch IPS touchscreen with 800x480 resolution connects via MIPI DSI for Raspberry Pi 5 through Pi 1A+ with five-point capacitive touch

  • Plug-and-play display for Raspberry Pi via MIPI DSI
  • 3 inch IPS panel gives wide viewing angles
  • 800 x 480 pixel resolution at 60 Hz refresh
  • Five-point capacitive touch supports multi-touch on Raspberry Pi OS
  • Three ribbon cables (5 cm, 10 cm, 16 cm) plus mounting hardware included

Raspberry Pi Touch Display

The 4.3 inch IPS panel connects directly to the MIPI DSI port on Raspberry Pi boards from the original 1A+ through the Pi 5. It adds an 800x480 pixel capacitive touchscreen with five-point input for projects that need a compact interactive screen.

Steady 60 Hz Operation

The display runs at a constant 60 Hz refresh rate without an HDMI link, so the GPU drives the panel natively over the DSI bus. This avoids the latency and power draw of an external converter during long sessions.

Direct Mounting Kit

Four M2.5 standoff sets and three ribbon cables of 5 cm, 10 cm and 16 cm let you secure the board at different heights and orientations. A cross-head screwdriver is included for assembly.

How it compares

Measured against everything we stock in 2-in-1 Device Accessories, at today’s prices. Recalculated every night.

Price $54.99
Typical for this category: the median of 7,473 items is $56.99.

New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Does the 4.3" IPS panel draw enough power to heat up the Raspberry Pi when it runs all day?

The display connects directly to the MIPI DSI port marked CAM/DISP on Pi 5 or DISPLAY on earlier boards, drawing its power from the Pi itself with no separate supply needed.

Which Raspberry Pi board and cable length must I already have to attach this touchscreen?

Compatible boards are Pi 5, 4B, 3B+, 3B, 3A+, 2B, 1B+ and 1A+; the kit supplies 5 cm, 10 cm and 16 cm ribbon cables for the DSI connector.

Will the 5-point capacitive touch still work if I keep an older Pi 2B or 1A+ in the same project?

Yes — the screen supports multi-touch on Raspberry Pi OS and single-touch on Ubuntu across every listed model from Pi 5 down to the original 1A+.

More in 2-in-1 Device Accessories

Similar items