We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular printhead module with metal housing and connector pins

Kyocera

Kyocera 310-E4602625-E Printhead for Evolis Pebble 4 Quantum 2 Securion

SKU CH-RD1S-A11SA

Genuine Kyocera printhead compatible with Evolis Pebble 4, Quantum 2 and Securion ID card printers

  • Product categoryPrinter Accessories
  • Product categoryPrinthead
  • Genuine Kyocera printhead restores sharp card output
  • Part numbers 310-E4602625-E, S10000, S5151, S3651 ensure exact fit
  • Designed for Evolis Pebble 4, Quantum 2, Securion printers
  • New condition guarantees reliable first-install performance
  • Inspected and cleaned to meet manufacturer specifications

Genuine Kyocera printhead for Evolis card printers

The Kyocera 310-E4602625-E printhead is a genuine replacement component designed for Evolis Pebble 4, Quantum 2 and Securion ID card printers. It restores full printing capability when the original head reaches end of life. Organisations issuing staff badges, student cards or access credentials use this part to maintain consistent output quality. The part numbers S10000, S5151 and S3651 confirm cross-reference compatibility across the supported models.

Thermal behaviour and power in normal operation

The printhead operates within the thermal envelope defined by the host printer, drawing power only during active card printing cycles. No separate cooling or power supply is required beyond what the Evolis chassis provides. Acoustic output is limited to the mechanical movement of the printer transport; the head itself adds no audible noise. Normal use sees the component reach operating temperature quickly and maintain stability throughout batch runs.

What the supplied references change

The multiple part numbers (310-E4602625-E, S10000, S5151, S3651) let technicians verify the correct spare against existing inventory records without guessing. This reduces the risk of ordering an incompatible head for a different Evolis series. The item ships as a standalone printhead; no cables, mounting brackets or firmware media are included. Installers must reuse the existing ribbon cable and retention hardware from the printer.

How it compares

Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.

Price $247.99
Pricier than about 81% of the 5,855 comparable items (median $91.99).

Specifications

Product
Part number310-E4602625-E, S10000, S5151, S3651
Product categoryPrinter Accessories

Questions about this item

How do I install the Kyocera 310-E4602625-E printhead into my Evolis Pebble 4 printer, and what step is often missed?

Power off the printer, open the cover, release the printhead latch, align the new unit with the guide pins, press firmly until it clicks, then close the latch before powering on; the step most often missed is forgetting to reseat the latch fully, which leaves the head unpowered.

What maintenance or replacement will the 310-E4602625-E printhead need over its life?

Regular cleaning with an Evolis-approved cleaning card or swab after every ribbon change removes debris that degrades print quality; the head itself is a consumable and must be replaced when nozzles fail or output shows permanent streaks.

What limit appears first on the 310-E4602625-E during continuous high-volume card printing?

Thermal buildup in the printhead is the first constraint; sustained runs without pauses cause temperature protection to pause printing until the head cools, limiting uninterrupted throughput.

More in Print & Scan Accessories

Similar items