We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
LCDBros NT173WDM-N23 V8.0 matte replacement screen 1600x900 30 pins

LCDBros

LCDBros Replacement Screen NT173WDM-N23 V8.0 30 Pins 1600x900 Matte

SKU CH-FY2F-08WBR

A 1600x900 matte replacement panel with a 30-pin connector for the exact NT173WDM-N23 V8.0 model

  • Product typeReplacement Screen
  • Exact fit for NT173WDM-N23 V8.0 models
  • 1600×900 HD+ resolution matches original spec
  • Matte finish reduces glare in bright rooms
  • 30-pin connector aligns with factory cable
  • Brand new LCDBros panel, 100 % compatible

Exact Model Match Required

This LCDBros replacement screen carries the part number NT173WDM-N23 V8.0. It presents a 1600x900 HD+ resolution with a matte surface. The panel connects through a 30-pin interface.

For Repair Technicians and DIY Owners

The part suits anyone replacing a damaged panel in a device that specifies this exact model. Buyers who cannot confirm the model, resolution, backlight type and connector on their original screen should not purchase.

30-Pin Connector Decides Fit

The 30-pin connector is the single specification that determines whether this panel will install and function. Verify the original screen uses the same pin count before ordering.

How it compares

Measured against everything we stock in Monitor Mounts & Display Accessories, at today’s prices. Recalculated every night.

Price $50.99
Pricier than about 59% of the 10,638 comparable items (median $42.99).

Specifications

Product
Brand nameLCDBros
Model nameNT173WDM-N23 V8.0
Product typeReplacement Screen

Questions about this item

How do I install the NT173WDM-N23 V8.0 30-pin replacement screen, and what step causes the most returns?

Disconnect power and battery, remove the bezel, unplug the old 30-pin cable, fit the new panel, reconnect the cable firmly, then test before reassembling; the step most often missed is reseating the 30-pin connector fully on both ends.

What maintenance or replacement will the NT173WDM-N23 V8.0 panel need over time?

No scheduled maintenance is required; if backlight brightness fades or the matte coating is damaged, the entire panel would need replacement.

What limit appears first on the NT173WDM-N23 V8.0 during sustained use?

The 1600x900 resolution and 30-pin interface set the hard ceiling; extended operation is bounded by the panel's native refresh timing and backlight consistency.

More in Monitor Mounts & Display Accessories

Similar items