Lee Filters CC25G Green Color Compensating 1.3x 0.4-Stop Polyester Filter 100x100mm
A 100x100mm polyester filter that absorbs blue and red light with a 1.3x factor for colour compensation
- Corrects color balance by absorbing blue and red hues
- Precise 1.3x filter factor gives 0.4-stop exposure control
- Stackable design allows combined use for stronger compensation
- High-quality polyester construction resists wear in regular use
- Fits 100x100mm holders for wide lens compatibility
Product Identity
The Lee Filters CC25G is a 100x100mm green color compensating polyester filter designed for photographers who need precise color balance correction. It absorbs blue and red hues to reduce overall color temperature, making it suitable for daylight or tungsten lighting conditions where accurate color rendering is essential.
Installation Notes
The square 100x100mm format fits standard filter holders, allowing the filter to slide into place without threading. Polyester construction makes it lighter than glass but more prone to creasing if handled roughly; store it flat in a protective sleeve to avoid permanent deformation that would affect image quality.
Capacity and Limits
With a 1.3x filter factor (.4 stop), the CC25G provides a measured green density of 25 for subtle color shifts. Stacking multiple filters increases absorption for stronger correction, though each layer adds the same exposure penalty and can introduce vignetting with wide-angle lenses. It corrects color casts but does not replace neutral density or polarising filters for exposure or glare control.
How it compares
Measured against everything we stock in Camera Extras & Accessory Packs, at today’s prices. Recalculated every night.
- Price $28.99
- Cheaper than about 61% of the 2,266 comparable items (median $39.99).
Specifications
No published specifications for this item yet.
Questions about this item
How do I verify the filter is giving the correct 0.4-stop green compensation after mounting it?
Meter a neutral grey card through the filter; the reading should drop by 0.4 stop compared to the bare lens, confirming the 1.3x factor is active.
What comes in the box and what must I supply to use the 100x100mm filter?
The box contains the CC25G polyester filter only; you need a 100mm filter holder and an adapter ring that matches your lens thread.
Which CC green strength should I choose for a standard 0.4-stop correction?
The CC25G designation indicates a 25 green density, delivering exactly the 0.4-stop shift quoted for this filter.
More in Camera Extras & Accessory Packs
Similar items
Weinandianzi CSJ-L2101.K206H 13MP IMX214 MIPI Camera Module Autofocus 75° 30PIN
- 13 × 9 × 9 cm
- IMX214
Insta360 CINX2CB/G 2-in-1 Invisible Selfie Stick Tripod 9.6-42.9" camera accessory
Weinandianzi WN-L2007.K114R USB Camera Module 106° 60FPS 1/2.8 IMX307
- 13 × 9 × 9 cm
- Black





