Legend Valve 114-709NL 1/2 1807 x 3/8OD T596NL Q Stop Valve
1/2 PEX by 3/8 inch OD no-lead chrome brass quarter-turn straight stop valve
- Product typePipes, Valves & Fittings
- No-lead brass construction reduces exposure risk
- Quarter-turn operation enables quick shut-off
- Straight stop design fits inline piping runs
- Chrome finish resists corrosion in wet areas
- California Prop 65 warning discloses chemical content
Lead-Free Brass Stop Valve
This Legend Valve stop valve is a 1/2 inch PEX by 3/8 inch OD straight fitting with a quarter-turn handle. It uses no-lead chrome-plated brass construction and carries the T-596NL designation for potable-water installations.
Quarter-Turn Replacement
The valve replaces older multi-turn stops that require several rotations to shut off. A quarter-turn mechanism cuts operation time and reduces wear on the seat, making the change worthwhile when a fixture supply line is being updated or a corroded stop is removed.
PEX Supply Installers
Suited for plumbers and DIYers connecting 1/2 inch PEX tubing to 3/8 inch OD fixture supplies in residential or light-commercial work. Not intended for installers who need a compression inlet, a different outlet diameter, or a valve rated for high-pressure steam service.
How it compares
Measured against everything we stock in Meters, Testers & Measuring Tools, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 94% of the 3,030 comparable items (median $54.99).
Specifications
| Product | |
|---|---|
| Brand name | LEGEND VALVE |
| Product type | Pipes, Valves & Fittings |
Questions about this item
What pipe and outlet sizes does the 114-709NL straight stop valve connect?
The valve joins a 1/2 PEX inlet to a 3/8 inch OD outlet using a quarter-turn mechanism.
Which step is commonly missed when installing the T-596NL no-lead chrome brass valve on PEX tubing?
Installers often forget to fully seat the PEX ring and crimp it with a calibrated tool before tightening the valve nut.
When should the 1807 quarter-turn cartridge be inspected or replaced in normal service?
Check the cartridge for stiffness or drips every few years; replace it if the handle turns loosely or water seeps past the closed position.
More in Meters, Testers & Measuring Tools
Similar items
JacobsParts Inc. DMUL-01 7-Function Digital Multimeter Measurement Tool
- 200-750 V
- 200mV-1000 V
JacobsParts Inc. DMPROBES-B Gold Plated Test Leads 1000V 20A 36in
- Electrical Probes
iKKEGOL OBD2 16 Pin 60 cm T Splitter Cable
- 60 cm/2 ft/23.6 in
- 0.22 lb (0.1 kg)





