Legend Valve 350-299 2 x 1-1/4 x 1-1/4 Black Reducing Tee
A 2" x 1-1/4" x 1-1/4" SA black reducing tee with FNPT connections on all three ports
- Black reducing tee connects three pipe sections
- Female NPT threads on all three ports
- 2-inch by 1-1/4-inch by 1-1/4-inch flow configuration
- Legend Valve brand manufactured for plumbing systems
- California Proposition 65 chemical warning applies
Legend Valve Reducing Tee 350-299
This reducing tee connects three female NPT threads with a 2-inch inlet and two 1-1/4-inch outlets. It is built for black steel piping systems in plumbing and industrial applications. The fitting carries a California Proposition 65 notice for chemicals linked to cancer and reproductive harm.
Upgrading From Smaller Or Straight Tees
A straight tee of the same diameter does not allow a direct step-down in pipe size. This reducing tee replaces a straight tee plus separate reducers, cutting joint count and potential leak paths. The jump is worth it when a single branch must drop from 2-inch to 1-1/4-inch without extra couplings.
Suits Installers Reducing Main Line To Branches
This tee suits installers who need a single factory-made transition from a 2-inch main to two 1-1/4-inch branches in black steel. It is not for systems that require equal 2-inch outlets on all three ports or for installers who need a sweat, press or push-fit connection instead of threaded NPT.
How it compares
Measured against everything we stock in Garden Hoses & Pipe Tubing, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 63% of the 973 comparable items (median $21.99).
Specifications
| Product | |
|---|---|
| Brand name | LEGEND VALVE |
Questions about this item
What pipe sizes does the 2 x 1-1/4 x 1-1/4 reducing tee connect?
It joins a 2-inch female NPT inlet to two 1-1/4-inch female NPT outlets in a black steel tee body.
How do you seal the FNPT threads on this tee, and what step is often missed?
Apply PTFE tape or pipe dope to the male threads only, then tighten until snug; the common error is over-tightening and cracking the cast iron.
Does the black steel tee need any coating or inspection after installation?
No routine coating is required; inspect joints for leaks after pressure testing and replace the tee if corrosion appears.
More in Garden Hoses & Pipe Tubing
Similar items
JAKARDA 72-inch Shower Hose SUS 304 Stainless Steel Brass Fitting
- 72 in (183 cm)
- 72 in (183 cm)
$14.99
0.00018161BTC
In stock
Value Brand
Value Brand 1/2" MNPT x 5 ft TBE Carbon Steel Pipe Nipple Sch 40
$14.99
0.00018161BTC
In stock
