We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel reducing tee with three threaded openings

Legend Valve

Legend Valve 352-297 Galvanized Reducing Tee

SKU CH-WDMD-5BNA5

Galvanised reducing tee connects 2" and 1" female NPT pipes for plumbing systems

  • Galvanized steel resists corrosion in water systems
  • Reducing tee connects three pipes at different diameters
  • Female NPT threads on all three ends simplify assembly
  • California Prop 65 warning notes chemical exposure risk
  • Legend Valve 352-297 model ensures consistent quality

Product Identity

The Legend Valve 352-297 is a galvanized reducing tee designed for plumbing installations. It features a 2" x 1" x 2" configuration with FNPT threads on all three ports. This new fitting connects pipes of different diameters in a T-shaped junction for fluid distribution.

Upgrade Context

This tee replaces a straight coupling or a same-size tee when a branch line requires a smaller diameter than the main run. The jump is worth it when consolidating two fittings into one reduces potential leak points and installation time. It suits systems requiring a durable, threaded transition without soldering or welding.

Capacity and Limits

The galvanized coating provides corrosion resistance for standard water supply and compatible fluid lines. It comfortably handles typical residential and commercial plumbing pressures at the stated dimensions. The fitting runs out when system requirements exceed the pressure rating of standard galvanized malleable iron or when chemical incompatibility with the Proposition 65 listed substances applies.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $16.99
Typical for this category: the median of 2,955 items is $17.99.

Specifications

Product
Brand nameLEGEND VALVE

Questions about this item

What thread size and type does the 2" x 1" x 2" galvanized reducing tee use?

The tee has female NPT threads on all three ports, sized at two inches, one inch, and two inches respectively.

How do I install this reducing tee and what is the common mistake?

Apply thread sealant or tape to the male pipe threads, then tighten each connection securely; the frequent error is over-tightening which can crack the galvanized casting.

When should I replace this galvanized reducing tee?

Replace the fitting if you see white corrosion deposits, rust staining, or any leakage at the threaded joints during routine plumbing inspections.

More in Hose Fittings, Adapters & Clamps

Similar items