We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized reducing tee fitting with three threaded openings

Legend Valve

Legend Valve 352-299 galvanized reducing tee

SKU CH-5DAP-ECQKC

Galvanized reducing tee joins three female NPT pipes at 2, 1-1/4 and 1-1/4 inches

  • Galvanized steel resists corrosion in water lines
  • Reducing tee joins three pipes at different diameters
  • Female NPT threads on all three ports
  • Lead-content warning required under California Proposition 65
  • New condition, ready for immediate installation

Galvanized Reducing Tee 352-299

The Legend Valve 352-299 galvanized reducing tee connects three female NPT threads at different diameters. It is intended for plumbers and maintenance technicians joining 2-inch and 1-1/4-inch pipe sections in water or gas distribution systems.

Sustained Pressure Performance

The galvanized coating protects the fitting against corrosion during long-term exposure to moisture and varying fluid temperatures. The threaded joints maintain a reliable seal under continuous system pressure without the degradation seen in short-term test bursts.

Pre-Installation Checks

Verify that the existing piping uses compatible female NPT threads and that the 2-inch by 1-1/4-inch by 1-1/4-inch configuration matches your layout. Confirm local code acceptance for galvanized fittings and review the Proposition 65 notice regarding chemical content before purchase.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $16.99
Typical for this category: the median of 2,955 items is $17.99.

Specifications

Product
Brand nameLEGEND VALVE

Questions about this item

How much heat does the 352-299 galvanized tee add to a plumbing system running continuously?

The galvanized tee is a passive fitting with no moving parts or power draw, so it adds no measurable heat to the system during continuous operation.

What pipe threads must I already have to install the 352-299 reducing tee?

You need three female NPT connections — one 2 inch and two 1-1/4 inch — to match the FNPT ends on this tee.

Will the 352-299 galvanized tee thread onto older black-iron pipe with standard NPT threads?

Yes, the FNPT threads on this tee follow the same NPT standard used on legacy black-iron pipe, so they engage directly without adapters.

More in Hose Fittings, Adapters & Clamps

Similar items