We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass press reducing tee with three copper connections

Legend Valve

Legend Valve 450-231P Press Reducing Tee 1-1/4x1/2x1-1/4

SKU CH-DG8N-M0MJT

Press reducing tee connects 1-1/4 inch and 1/2 inch piping for plumbing installations

  • Press reducing tee connects three pipe sizes in one fitting
  • 1-1/4 inch to 1/2 inch to 1-1/4 inch press connections
  • Model 450-231P from Legend Valve plumbing range
  • New condition press fitting for residential and commercial systems
  • California Proposition 65 warning applies to this product

Press Reducing Tee 1-1/4 x 1/2 x 1-1/4

This press reducing tee connects a 1/2-inch branch to a 1-1/4-inch main line using press-fit technology. It suits plumbers and contractors installing copper or compatible piping systems where a secure, solder-free joint is required. The fitting is new and manufactured by Legend Valve.

Capacity and headroom

The tee handles standard residential and light commercial water pressures for hot and cold distribution. It runs out when system pressure exceeds the press-joint rating or when pipe material is incompatible with the press profile. No flow-rate or pressure figures are supplied.

Press interface limits

The press connection requires a compatible press tool and jaws matched to the 1-1/4-inch and 1/2-inch sizes. It cannot be used with threaded, soldered or push-fit pipe ends. California Proposition 65 warnings apply for cancer and reproductive harm.

How it compares

Measured against everything we stock in Plumbing Valves & Valve Assemblies, at today’s prices. Recalculated every night.

Price $43.99
Typical for this category: the median of 720 items is $47.49.

Specifications

Product
Brand nameLEGEND VALVE

Questions about this item

Will the 1-1/4-inch press ends of the 450-231P connect to my existing 1-1/4-inch copper pipe without soldering?

Yes, the press ends on the 450-231P are designed for 1-1/4-inch pipe and create a sealed joint using a press tool instead of solder.

How can I verify the 450-231P reducing tee is seated correctly after pressing?

A properly pressed joint shows a uniform bead around each end and the tool’s indicator confirms full closure; a pressure test will then prove the seal.

Does the 450-231P box include the press jaws or rings needed for installation?

The package contains only the 450-231P reducing tee; compatible press jaws or rings for 1-1/4-inch and 1/2-inch sizes must be purchased separately.

More in Plumbing Valves & Valve Assemblies

Similar items