Legris 3009 56 11 Push-Fit Elbow Trap 1/4 in
Push-fit elbow fitting connects 1/4 in tube to 1/8 in FNPT thread, rated 290 psi at 175 °F
- Product typeDrain Components
- Product colorBlack
- Push-fit elbow enables tool-free vacuum line connections
- Fiberglass-reinforced nylon body withstands 290 psi operating pressure
- Rated to 175 °F maximum temperature for demanding environments
- 1/4 in tube to 1/8 in FNPT transitions vacuum systems efficiently
- Pre-applied thread sealant not included — apply your preferred sealant
1/4 in Push-Fit Elbow Fitting
This push-fit elbow fitting connects a 1/4 in tube to a 1/8 in FNPT port. The body is made from fibre-reinforced nylon and is rated for 290 psi at 175 Degrees F. It is designed for vacuum applications. The fitting installs without tools.
Who this suits and who it does not
It suits installers who need a quick 90-degree connection between 1/4 in tubing and 1/8 in female threads. It does not suit systems that exceed the pressure or temperature limits. Buyers needing a different tube diameter or thread size should look elsewhere.
Key specification: 1/4 in tube to 1/8 in FNPT
The decisive specification is the combination of a 1/4 in push-to-connect end and a 1/8 in FNPT end. This pairing determines whether the fitting matches the tubing and port in your system. Verify both sizes before ordering.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $37.99
- Pricier than about 55% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3009 56 11 |
| Product type | Drain Components |
| Product color | Black |
Questions about this item
What tube outer diameter and thread size does the Legris 3009 56 11 elbow accept?
The fitting connects a 1/4 in tube on the push-fit side to a 1/8 in FNPT thread on the other side.
How is the Legris 3009 56 11 installed, and what step is often missed?
Push the 1/4 in tube firmly into the push-fit end until it seats, then thread the 1/8 in FNPT side into the mating port using the pre-applied sealant; the common error is not pushing the tube past the internal collet.
When should the Legris 3009 56 11 be replaced?
Replace the fitting if it sees pressure above 290 psi or temperature above 175 Degrees F, or if the fiberglass-reinforced nylon body shows cracking or the sealant degrades.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris
Legris 3140 56 00 Push-Fit Wye Fitting 1/4 in Brass
- Drain Components
- HAWA
$37.99
0.00046258BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017035BTC
In stock
Dayton
Dayton 3ZN36 Rigid Shaft Coupling Trap 1.85 in OD 4000 RPM 2600 in-lb
- Drain Components
$37.99
0.00046258BTC
In stock