We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass push-fit bulkhead connector, 1/4 tube to 1/8 NPT, silver finish, pack of 10

Legris

Legris 3036 56 11 F Bulkhead Connector 1/4 OD x 1/8 NPT PK10

SKU CH-KT1V-B9F6R MPN 3036

A pack of ten brass bulkhead connectors joins 1/4 inch tubing to 1/8 inch NPT threads for air lines rated to 290 psi and 176 degrees F

  • Product typeDrain Components
  • Push-to-connect design speeds pneumatic assembly
  • 1/4 in tube to 1/8 in FNPT fits standard air lines
  • Brass body withstands 290 psi operating pressure
  • Rated to 176 °F for demanding environments
  • Pack of 10 fittings supports volume projects

Push-Fit Bulkhead Connector

The Legris 3036 56 11 F is a brass push-fit bulkhead connector designed for air applications. It joins 1/4 inch outer diameter tubing to a 1/8 inch female NPT thread. The pack contains 10 fittings suitable for pneumatic system assembly.

Sustained Pressure Performance

Rated for a maximum operating pressure of 290 psi and a maximum operating temperature of 176 Degrees F, the fitting maintains a seal under continuous load. Brass construction resists corrosion in typical compressed air environments over extended service periods.

Thread and Seal Limits

The 1/8 inch NPT connection relies on external sealant because no pre-applied thread sealant is included. Installers must apply compatible tape or compound to prevent leakage at the threaded bulkhead interface.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $60.99
Pricier than about 67% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameLegris
Model name3036 56 11
Product typeDrain Components

Questions about this item

Does the brass fitting get hot or make noise when air runs through it all day?

The brass body stays at the air temperature; it has no moving parts so it runs silently. Maximum operating temperature is 176 degrees F and maximum pressure is 290 psi.

What tubing and thread sealant do I need to install the 1/4 OD push-to-connect side and the 1/8 FNPT side?

Use 1/4 inch outer-diameter tubing for the push-fit end and apply your own thread sealant on the 1/8 NPT female threads; no sealant is pre-applied.

Will this bulkhead connector work with the older 1/4 inch nylon tubing and 1/8 NPT brass fittings already in my shop?

Yes, the push-to-connect end accepts standard 1/4 inch OD tubing and the FNPT end mates with any 1/8 NPT male thread.

More in Drain Stoppers, Strainers & Traps

Similar items