We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass push-fit connector 8 mm tube to 10 mm male thread silver finish

Legris

Legris 3101 08 60 Male Connector 8mm x 10mm trap

SKU CH-P0PS-EZH54 MPN 3101

Connects an 8 mm tube to a 10 mm male thread with a 290 psi pressure rating

  • Product typeDrain Components
  • Main materialHAWA
  • Push-to-connect design speeds installation on 8 mm tube
  • Male metric M10 thread secures a leak-free 10 mm connection
  • Brass construction handles 290 psi maximum operating pressure
  • Rated to 175 °F for reliable high-temperature performance
  • Compact 21 mm overall length fits tight plumbing spaces

Male Connector 8 mm × 10 mm

This push-fit adapter joins an 8 mm tube to a 10 mm male metric thread. It is built from brass and rated for 290 psi at 175 °F. The fitting suits pneumatic or vacuum lines that need a compact, tool-free connection.

Installers needing a straight 8-to-10 mm transition

Technicians who require an elbow, tee or a different thread standard will not find those configurations here. The part is a single straight male connector, so systems needing bulkhead, female or larger-bore fittings must look elsewhere.

8 mm tube to 10 mm male metric thread

This specific push-to-connect / male-thread combination determines whether the fitting matches the port and tubing in your circuit. Verify both dimensions before ordering.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $45.99
Pricier than about 60% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameLegris
Model name3101 08 60
Product typeDrain Components
Size & build
Main materialHAWA

Questions about this item

Will the 8 mm push-to-connect side seal reliably on my existing 8 mm nylon tubing?

Yes, the push-to-connect end is designed for 8 mm tube outer diameter and rated to 290 psi at 175 °F.

How can I confirm the M10 male thread is sealing properly after installation?

Pressurise the system up to 290 psi and check the 10 mm male thread joint for leaks; the pre-applied sealant helps ensure a tight fit.

Does the pack of ten include any thread sealant or do I need to buy it separately?

The connectors come with pre-applied thread sealant, so no separate sealant purchase is required.

More in Drain Stoppers, Strainers & Traps

Similar items