Legris 3101 08 67 Push-Fit Adapter Fitting 8mm 10 PK
Pack of ten brass push-fit adapters joining 8 mm tube to 12 mm male metric thread, rated to 290 psi and 175 °F
- Product typeDrain Components
- Push-to-connect design speeds installation on 8 mm tube
- Brass body withstands 290 psi working pressure
- Rated to 175 °F for demanding fluid lines
- Male metric 12 mm thread fits standard ports
- Pack of 10 fittings covers multiple connections
Brass push-fit adapter for 8 mm tube
This brass adapter connects 8 mm tubing to a 12 mm male metric thread using a push-to-connect design. It comes in a pack of ten and is rated for 290 psi at up to 175 degrees F. Pre-applied thread sealant is not included.
Suits vacuum lines needing a straight metric join
Installers working with 8 mm tube and a 12 mm male port can use this fitting without tools. It is not for systems that require a different tube diameter, a female thread, or a higher pressure rating than 290 psi.
8 mm tube to 12 mm male metric thread
The fitting accepts an 8 mm outer-diameter tube on the push-fit side and mates with a 12 mm male metric thread on the other. This single interface match determines whether the part fits the application.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $51.99
- Pricier than about 63% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3101 08 67 |
| Product type | Drain Components |
Questions about this item
Will the 8 mm push-to-connect end seal onto the 8 mm tubing I already have?
Yes — Side A is an 8 mm push-to-connect port designed for 8 mm tube outer diameter, so your existing tubing fits directly.
How can I confirm the 290 psi rating is holding after installation?
Pressurise the line to your working pressure, then brush soapy water on the 12 mm male thread and the 8 mm push-fit joint; no bubbles means the seal is sound.
Does the 10-pack include thread sealant or must I buy it separately?
The fittings come without pre-applied thread sealant, so you will need to supply your own sealant for the 12 mm male metric threads.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris
Legris 3126 08 00 Push-Fit Trap 8 mm 290 psi 176 °F Red
- Drain Components
- HAWA
$51.99
0.0006279BTC
In stock
Legris
Legris 3109 55 10 Push-Fit Elbow Fitting 3/16 in Tube 1/8 in MBSPT Black
- Drain Components
- Black
$51.99
0.0006279BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00016896BTC
In stock