We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass push-fit adapter fitting, 16mm tube, silver finish

Legris

Legris 3101 16 17 Push-Fit Adapter Fitting 16mm Brass

SKU CH-913M-HWB1R MPN 3101

A push-fit adapter fitting connects 16 mm tube to a 3/8 in MBSPP thread, rated for 290 psi and 175 °F

  • Product typeDrain Components
  • Push-to-connect design enables quick installation without tools
  • Brass construction resists corrosion for long-lasting performance
  • 16 mm tube size matches standard plumbing requirements
  • 290 psi pressure rating handles demanding vacuum applications
  • 175 °F temperature limit suits high-heat environments

Push-Fit Adapter for 16 mm Tube

This Legris 3101 adapter connects a 16 mm push-fit tube to a 3/8 in MBSPP thread. The brass body is rated for 290 psi and 175 degrees F. It suits vacuum lines and other pneumatic circuits that require a straight, reusable joint.

Pre-applied sealant is not included

The listing confirms that thread sealant is not supplied on the fitting. Installers must provide their own compatible sealant or tape for the 3/8 in MBSPP side to achieve a leak-free connection.

Verify tube size and thread standard

Confirm the existing tube has a 16 mm outer diameter and that the mating port uses a 3/8 in MBSPP thread. Systems with different tube diameters, metric threads, or higher pressure and temperature demands cannot use this adapter.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $20.99
Cheaper than about 63% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameLegris
Model name3101 16 17
Product typeDrain Components

Questions about this item

How often should the brass push-fit adapter be inspected or replaced in a vacuum system?

The brass fitting is rated for 290 psi and 175 °F; inspect seals annually and replace if leakage or corrosion appears.

What pressure or temperature limit will be reached first during continuous vacuum operation?

The 290 psi maximum operating pressure is the primary limit; sustained vacuum levels well below this will not trigger the 175 °F temperature ceiling.

Does the adapter generate noticeable heat or noise when running all day under vacuum?

As a passive brass fitting with no moving parts, it produces no noise and negligible heat during continuous vacuum service.

More in Drain Stoppers, Strainers & Traps

Similar items