Legris 3102 12 00 Push-Fit Elbow Fitting 12mm
Connects two 12 mm tubes at a right angle using push-fit ends rated to 290 psi and 176 °F
- Product typeDrain Components
- Main materialHAWA
- Product colorBlack
- Push-fit design enables fast, tool-free installation
- 12 mm tube size fits standard pneumatic lines
- Fiberglass-reinforced nylon resists impact and chemical exposure
- 290 psi rating handles high-pressure air systems
- 176 °F maximum temperature suits demanding environments
Legris 12mm push-fit elbow
The Legris 3102 12 00 is a push-fit elbow fitting designed for 12mm tube outer diameter on both ports. It connects two pneumatic lines at a right angle without tools or separate sealant. The fiberglass-reinforced nylon body resists impact and vibration in compressed-air installations.
Upgrade from threaded or barbed elbows
This fitting replaces threaded elbows that require tape and wrenches or barbed fittings that need clamps. The push-to-connect design cuts assembly time and eliminates leak paths from loose threads or degraded clamps. It is not suited for systems that demand metal-to-metal sealing or temperatures beyond the rated limit.
Sustained pressure and temperature performance
Rated for 290 psi maximum operating pressure and 176 degrees F maximum operating temperature, the fitting maintains seal integrity under continuous pneumatic load. The reinforced nylon resists creep during extended pressurisation cycles. Overall length is 40 mm, keeping the joint compact inside cabinets or machine frames.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $99.99
- Pricier than about 77% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3102 12 00 |
| Product type | Drain Components |
| Product color | Black |
| Size & build | |
| Main material | HAWA |
Questions about this item
What tube size does the 12 mm push-fit elbow accept?
The fitting takes 12 mm outer-diameter tubing on both push-to-connect ports.
How do you install the push-fit elbow, and what step is often missed?
Push each tube firmly into the fitting until it seats; the common miss is not pushing far enough to engage the internal grab ring.
When should the fiberglass-reinforced nylon elbow be replaced?
Replace it if you see cracking, deformation or leakage at the 290 psi / 176 °F rating limits.
More in Drain Stoppers, Strainers & Traps
Similar items
FRANKLIN
FRANKLIN 2801054915 Drain Trap Control Box 1/2HP 230V 1Phase
- Drain Components
$99.99
0.0012179BTC
In stock
Legris
Legris 3109 12 22 Push-Fit Elbow Trap 12mm 1/2in 290psi 175F
- Drain Components
- HAWA
$100.99
0.00123009BTC
In stock
