Legris 3102 16 00 Push-Fit Elbow Fitting 16mm
Push-fit elbow connects 16 mm tubes at 90 degrees, rated to 290 psi and 176 °F
- Product typeDrain Components
- Push-to-connect design enables quick, tool-free installation
- 16 mm tube size on both ends matches standard pneumatic lines
- Fiberglass-reinforced nylon body resists impact and vibration
- 290 psi maximum operating pressure handles demanding air systems
- 176 °F temperature rating suits high-heat environments
16 mm push-fit elbow for air lines
The Legris 3102 16 00 connects two 16 mm tubes at a right angle using push-to-connect ends. It is built from black fiberglass-reinforced nylon for pneumatic plumbing in automotive or workshop systems. The fitting installs without tools and suits technicians who need a quick, reliable corner joint. It is not for buyers who need a threaded connection or a different tube diameter.
Thermals noise and power draw
As a passive plastic fitting it generates no heat, makes no sound and draws no power during normal use. The material withstands up to 176 degrees Fahrenheit and 290 psi, so it remains stable in typical compressed-air circuits. No fan, pump or electrical supply is involved, leaving the surrounding equipment unaffected.
16 mm tube size decides fit
The single specification that determines compatibility is the 16 mm outer diameter on both push-fit ports. If your tubing matches that size the elbow will seat correctly; if the tubing is larger or smaller the part cannot be used.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 74% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3102 16 00 |
| Product type | Drain Components |
Questions about this item
How do I install the 16 mm push-fit elbow and what step is often missed?
Cut the tube square, deburr the end, then push it firmly into each 16 mm port until it bottoms out; the step people skip is checking the insertion depth mark to confirm a full seat.
What maintenance or replacement will the fiberglass-reinforced nylon fitting need over time?
Inspect the O-ring seals periodically for hardening or cracking; replace the fitting if the black body shows stress-whitening or if leaks appear at the 290 psi rating limit.
Which limit appears first during continuous use at the 176 °F maximum temperature?
The 290 psi pressure rating derates as temperature climbs, so sustained operation near 176 °F will hit the reduced pressure ceiling before the material reaches its thermal limit.
More in Drain Stoppers, Strainers & Traps
Similar items
Hommate Drain Cleaner Blue48-New-02 48 Sticks 4 Pack
- Drain Cleaner Blue4…
- Multi
$14.99
0.00018187BTC
In stock
Nibco, Inc.
Nibco, Inc. 70735ALF-12 90° Hy-Set Elbow Trap 1/2 in
- Drain Components
- HAWA
$14.99
0.00018187BTC
In stock
Nibco, Inc.
Nibco, Inc. U6072LT 1-1/4" FTG x C Copper 90 Degree Long Radius Elbow trap
- Drain Components
$14.99
0.00018187BTC
In stock