Legris 3106 53 56 Unequal Union 1/8x1/4 in Pk10
Pack of ten push-fit unequal unions joining 1/8 in and 1/4 in tubing, rated to 290 psi and 176 °F
- Product typeDrain Components
- Main materialHAWA
- Product colorBlack
- Unequal union joins 1/8 in to 1/4 in tubing
- Push-to-connect ends need no tools for quick assembly
- Fiberglass-reinforced nylon resists impact and vibration
- Rated 290 psi at 176 °F for demanding air lines
- Pack of 10 fittings covers multiple connection points
Unequal Union 1/8x1/4 Inch
This Legris 3106 53 56 union joins 1/8 inch tubing to 1/4 inch tubing using push-to-connect ends on both sides. The pack contains ten black fittings made from fiberglass-reinforced nylon for air-line plumbing. It suits installers who need a quick, tool-free transition between two different tube diameters.
Sustained Pressure Performance
The fitting is rated for a maximum operating pressure of 290 psi and a maximum operating temperature of 176 degrees F. These limits apply to continuous service in compressed-air systems. The fiberglass-reinforced nylon body maintains its grip and seal under prolonged pressurised conditions without the need for thread sealant.
Thermals Noise and Power Draw
As a passive pneumatic component the union generates no noise, draws no power and produces no heat of its own. Its temperature simply follows the surrounding air and the compressed-air stream up to the 176 degree F rating. The black finish does not alter thermal behaviour in normal workshop environments.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $51.99
- Pricier than about 63% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3106 53 56 |
| Product type | Drain Components |
| Product color | Black |
| Size & build | |
| Main material | HAWA |
Questions about this item
Does the fitting get hot or noisy when compressed air runs through it continuously at 290 psi?
The fiberglass-reinforced nylon body stays at ambient temperature and has no moving parts, so it runs silently even at the maximum 290 psi operating pressure.
What tube sizes must I already have to connect both ends of this union?
You need 1/8 in outer-diameter tubing for side A and 1/4 in outer-diameter tubing for side B; both ends use push-to-connect ports.
Will the 1 5/16 in overall length fit alongside older 1/4 in push-fit fittings in the same manifold?
Yes, the 1 5/16 in length matches standard spacing for 1/4 in push-fit unions, so it aligns with existing fittings in the same line.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris 3126 08 00 Push-Fit Trap 8 mm 290 psi 176 °F Red
- Drain Components
- HAWA
Legris 3109 55 10 Push-Fit Elbow Fitting 3/16 in Tube 1/8 in MBSPT Black
- Drain Components
- Black





