Legris 3108 62 18 Male Branch Tee 1/2 in OD 290 PSI Pack of 10
Push-fit male branch tee connects two 1/2 in tubes to a 3/8 in MNPT thread at 290 PSI, supplied as a pack of 10
- Product typeDrain Components
- Main materialHAWA
- Product colorBlack
- Push-to-connect design enables tool-free installation on 1/2 in tubing
- Male NPT branch with pre-applied sealant speeds up threaded connections
- Rated for 290 PSI to handle demanding air and fluid lines
- Fiberglass-reinforced nylon body resists corrosion and cutting fluids
- Pack of 10 fittings supports multiple assembly points
Push-Fit Tee for Pneumatic Lines
The Legris 3108 62 18 is a male branch tee that joins two 1/2 in push-to-connect tubes to a 3/8 in male NPT port. Its fiberglass-reinforced nylon body handles air, cutting fluids and inert gases up to 290 PSI. Pre-applied thread sealant on the NPT end speeds installation without extra tape or compound. Supplied in a pack of ten for production or maintenance use.
Suits Quick-Connect Air Systems
This fitting suits technicians building or repairing push-fit pneumatic circuits that need a 3/8 in threaded branch. It does not suit systems that require compression or flare connections, metal-bodied fittings for higher temperatures, or any tube size other than 1/2 in OD on the push-to-connect ends.
1/2 in Push-to-Connect with 3/8 in MNPT Branch
The critical specification is the combination of dual 1/2 in push-to-connect ports and a single 3/8 in male NPT port with pre-applied sealant. If your circuit uses different tube diameters, thread sizes or connection styles, this tee will not fit.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $89.99
- Pricier than about 75% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3108 62 18 |
| Product type | Drain Components |
| Product color | Black |
| Size & build | |
| Main material | HAWA |
Questions about this item
What comes in the pack and what else do I need to connect 1/2 in OD tubing?
The pack contains ten 3108 62 18 male branch tees. Each tee has push-to-connect ends for 1/2 in OD tube on sides A and B and a 3/8 in MNPT thread on side C with pre-applied sealant. You only need the 1/2 in OD tubing; no separate ferrules or clamps are required.
How do I choose between the listed versions for my air line?
The product is offered as a single configuration: 1/2 in OD push-to-connect on both run ports and a 3/8 in male NPT branch with 290 PSI rating. Select this version when your tubing is 1/2 in OD and the branch must thread into a 3/8 in female NPT port.
What does the 290 PSI rating mean once the tee is installed in my compressed-air system?
It is the maximum working pressure the fiberglass-reinforced nylon body and push-to-connect seals are designed to hold at room temperature. In a real machine, keep the system pressure at or below 290 PSI and verify the tubing used also meets or exceeds that pressure.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris
Legris 3104 10 00 Push-Fit Tee Fitting 10mm Brass
- Drain Components
- Black
$89.99
0.00109725BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017058BTC
In stock
Red Hat
Red Hat 8040H008 3/8 in 120V AC Solenoid Valve Trap
- Drain Components
$90.99
0.00110944BTC
In stock