Legris 3109 56 18 90° Male Elbow 1/4 MNPT x Tube Pack 10
Pack of ten 90-degree push-fit elbows joining 1/4-inch tube to 3/8-inch MNPT, rated 290 psi and 175°F
- Product typeDrain Components
- Main materialHAWA
- Product colorBlack
- Push-to-connect design speeds installation with no tools required
- Pre-applied thread sealant ensures leak-free joints straight from the pack
- Fibreglass-reinforced nylon body handles up to 290 psi working pressure
- Rated for continuous use up to 175 °F in vacuum and fluid systems
- Pack of ten fittings covers multiple connection points in one purchase
90° Push-Fit Elbow Pack
The Legris 3109 56 18 fitting connects 1/4 inch outer-diameter tubing to a 3/8 inch male NPT port at a right angle. Fiberglass-reinforced nylon construction handles vacuum service and includes pre-applied thread sealant. Supplied as a pack of ten pieces.
Upgrade from Compression Fittings
Replaces traditional compression elbows where tool-free assembly and repositionable connections save installation time. The push-to-connect design eliminates ferrule tightening while the 290 psi pressure rating and 175 Degrees F temperature limit cover typical pneumatic and vacuum circuits.
Suits Pneumatic Panel Builders
Ideal for technicians assembling compressed-air or vacuum manifolds who need quick, repeatable joints in black nylon. Not suited for installers requiring metal threads, higher temperature service or larger tube diameters than the specified 1/4 inch push-fit end.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $49.99
- Pricier than about 62% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3109 56 18 |
| Product type | Drain Components |
| Product color | Black |
| Size & build | |
| Main material | HAWA |
Questions about this item
What tube outer diameter and thread size does the 3109 56 18 elbow accept?
The push-to-connect side fits 1/4 in tube outer diameter and the MNPT side is 1/4 in thread.
How do I install the push-fit elbow correctly?
Cut the tube square, push it fully into the fitting until it grips, then tighten the MNPT end with sealant applied; the common error is not seating the tube to the internal stop.
When should I replace the elbow or its sealant?
Replace if you see cracks in the fiberglass-reinforced nylon body, leakage at the MNPT threads, or if the system exceeds 290 psi or 175 Degrees F.
More in Drain Stoppers, Strainers & Traps
Similar items
Viega 79135 Bronze Straight Union Press-fit 1 in 3 21/32 in 200 psi 250 °F
- Drain Components
- HAWA
HAYWARD POOL PRODUCTS INC BFAS3010TFS 1" FNPT Bulkhead Tank Fitting trap
- Drain Components
- HAWA





