We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit elbow fitting with 8mm tube connection and 1/4 inch MBSPT thread

Legris

Legris 3113 08 13 Push-Fit Elbow Fitting 8mm

SKU CH-KC7H-W3S2F MPN 3113

Push-fit elbow connects 8 mm tube to 1/4 in MBSPT thread, fiberglass-reinforced nylon, 290 psi, 175 °F

  • Product typeDrain Components
  • Product colorBlack
  • Push-fit connection speeds vacuum-line installation
  • 8 mm tube size fits standard automotive vacuum hoses
  • Fiberglass-reinforced nylon withstands 290 psi operating pressure
  • Pre-applied thread sealant eliminates separate sealing step
  • Rated to 175 °F for under-hood heat resistance

Push-Fit Elbow for Vacuum Lines

This push-fit elbow fitting joins an 8 mm tube to a 1/4 inch MBSPT port. The body is moulded from fibre-glass-reinforced nylon and includes pre-applied thread sealant. It is rated for 290 psi and 175 °F maximum operating conditions. The black component is supplied new and ready for installation.

Suitable Uses and Limitations

The fitting suits vacuum applications that require a 90-degree change of direction between metric tubing and imperial pipe threads. It will not work where a straight connector, a tee or a different thread standard is needed. Buyers needing a larger tube diameter or a higher temperature rating must choose another part.

Critical Specification

The decisive detail is the Side A tube outer diameter of 8 mm paired with a Side B pipe size of 1/4 inch MBSPT. Both dimensions must match the existing tubing and port exactly, otherwise the fitting cannot seal.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $46.99
Pricier than about 61% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameLegris
Model name3113 08 13
Product typeDrain Components
Product colorBlack

Questions about this item

How do I install the 8mm push-fit side and the 1/4 MBSPT thread without cross-threading?

Push the 8mm tube straight in until it seats; for the 1/4 MBSPT thread, hand-tighten then turn one to two full turns using the pre-applied sealant — do not over-tighten the nylon body.

What maintenance or replacement will the fiberglass-reinforced nylon body and pre-applied sealant need later?

Inspect the push-fit grip ring and O-ring annually; replace the fitting if the nylon shows cracking or the sealant has washed out — the thread sealant is single-use.

Which limit appears first during sustained vacuum use at 175 Degrees F?

The 290 psi pressure rating is the governing limit; vacuum service stays well below it, so temperature (175 Degrees F) becomes the first constraint under continuous operation.

More in Drain Stoppers, Strainers & Traps

Similar items