Legris 3116 60 00 bulkhead union 3/8 in 290 psi PK10
A push-fit bulkhead union joining two 3/8 in tubes, rated to 290 psi and 176 °F, supplied in a pack of ten
- Product typeDrain Components
- Main materialHAWA
- Product colorBlack
- Push-to-connect design speeds installation without tools
- 290 psi rating handles demanding air-line pressure
- Fiberglass-reinforced nylon body resists impact and corrosion
- 176 °F maximum temperature suits hot-air systems
- Pack of ten fittings covers multiple connection points
Bulkhead Union 3/8 in 290 psi
This Legris bulkhead union joins two 3/8 inch tubes with push-to-connect ends. It is built from black fiberglass-reinforced nylon and rated for 290 psi at up to 176 degrees F. The fitting measures 1 11/16 in overall length and comes in a pack of ten. No thread sealant is pre-applied.
Air-line installers needing a through-panel joint
Technicians assembling pneumatic circuits on panels or bulkheads will find this union matches the 3/8 inch tube size and 290 psi rating. Installers who require a threaded connection, a different tube diameter, or a higher temperature limit should look at other fittings.
290 psi maximum operating pressure
The 290 psi rating is the single figure that decides whether this union suits the system pressure. If the circuit runs above this value the fitting is not suitable; if it stays at or below 290 psi the union meets the pressure requirement.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $82.99
- Pricier than about 73% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3116 60 00 |
| Product type | Drain Components |
| Product color | Black |
| Size & build | |
| Main material | HAWA |
Questions about this item
How can I verify the 3/8 in push-to-connect union is sealed and leak-free after installation?
Pressurise the line up to 290 psi and check for bubbles at both push-fit ends; the fitting is rated for 176 °F maximum operating temperature.
What comes in the PK10 pack and do I need any extra sealant or tools?
The pack contains ten black bulkhead unions made of fiberglass-reinforced nylon; no pre-applied thread sealant is included and no special tools are required for push-to-connect assembly.
Which Legris 3116 variant should I choose for a 3/8 in air line rated at 290 psi?
Select model 3116 60 00 — it matches 3/8 in tube OD on both sides, handles 290 psi and 176 °F, and is supplied in a pack of ten.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris 3140 04 56 Push-Fit Wye Fitting 5/32 in x 1/4 in Brass
- Drain Components
- HAWA
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Kohler K-9136-CP 1-1/2 in Brass PVC Chrome Tile-In Shower Drain
- Silver





