Legris 3129 08 14 Extended Male Elbow Trap 1/4 NPT PK10
Push-fit elbow connects 5/16-inch tube to 1/4 NPT male thread with pre-applied sealant, rated to 290 psi and 175 degrees Fahrenheit, pack of 10
- Product typeDrain Components
- Main materialHAWA
- Product colorBlack
- Push-to-connect design speeds installation with 5/16 in tube fit
- Extended male elbow routes 1/4 NPT threads in tight spaces
- Fiberglass-reinforced nylon body withstands 290 psi operating pressure
- Pre-applied thread sealant eliminates separate sealing step
- Rated to 175 °F for demanding vacuum applications
Push-Fit Elbow for Vacuum Lines
The Legris 3129 08 14 is a push-fit elbow fitting designed for vacuum applications. It connects 5/16 inch outer-diameter tubing to a 1/4 inch male NPT thread. The body is moulded from black fiberglass-reinforced nylon. A pack contains ten pieces.
Thermals Noise and Power Draw
The fitting is rated for a maximum operating temperature of 175 degrees Fahrenheit. It withstands pressures up to 290 psi in normal service. Pre-applied thread sealant on the NPT side helps create a leak-free seal without extra compounds. There are no moving parts to generate noise or consume power.
5/16 Inch Tube to 1/4 NPT Interface
The single specification that decides fitment is the combination of a 5/16 inch push-to-connect port and a 1/4 inch male NPT thread. Systems using different tube diameters or thread standards cannot use this elbow. Buyers who need a straight connector or a different thread size must select another part.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $76.99
- Pricier than about 72% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3129 08 14 |
| Product type | Drain Components |
| Product color | Black |
| Size & build | |
| Main material | HAWA |
Questions about this item
How do I install the 3129 08 14 elbow, and what step causes leaks?
Thread the 1/4 NPT male end into the port with the pre-applied sealant; do not add tape or paste. Push the 5/16 in tube fully into the push-to-connect side until it seats, then pull back to verify the collet grips.
What maintenance or replacement will the 3129 08 14 need over time?
Inspect the fiberglass-reinforced nylon body and collet for cracks or stress whitening. Replace the fitting if the tube no longer locks securely or if the pre-applied thread sealant shows signs of weeping after thermal cycles.
Which limit appears first when the 3129 08 14 runs continuously at pressure?
The 290 psi maximum operating pressure is the primary limit; sustained pressure at or above this value will cause fitting deformation before the 175 Degrees F temperature rating becomes critical.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris
Legris 3199 08 17 Male Elbow 8 mm OD 290 PSI PK10
- Drain Components
- HAWA
$76.99
0.0009406BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017092BTC
In stock
Legris
Legris 3129 60 14 Extended Male Elbow 3/8 in OD Pack of 10
- Drain Components
$76.99
0.0009406BTC
In stock