Legris 3169 04 20 Male Elbow Ext 90 D 4mm OD x 10-32 PK10 trap
Push-fit elbow connects 4 mm tubing to 10-32 UNF threads, rated 290 psi and 175 °F, pack of ten
- Product typeDrain Components
- Main materialHAWA
- Product colorBlack
- Push-fit elbow speeds vacuum line assembly
- 4 mm tube OD connects without tools
- #10-32 male thread seals directly into port
- Fiberglass-reinforced nylon withstands 175 °F heat
- 290 psi rating handles high-pressure vacuum systems
Male Elbow Push-Fit Fitting
The Legris 3169 04 20 is a 90-degree male elbow designed for vacuum applications. It connects 4 mm outer-diameter tubing to a #10-32 UNF threaded port using a push-to-connect interface. The body is moulded from black fibre-reinforced nylon and ships in a pack of ten.
Suitable uses and limits
This fitting suits pneumatic or vacuum circuits that require a compact right-angle connection at the stated pressure and temperature ratings. It is not for buyers who need a straight connector, a different thread size, or a metal-bodied fitting for higher mechanical loads.
Critical specification
The defining parameter is the maximum operating pressure of 290 psi combined with a maximum operating temperature of 175 Degrees F, which together determine whether the fitting matches the system design envelope.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $89.99
- Pricier than about 75% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3169 04 20 |
| Product type | Drain Components |
| Product color | Black |
| Size & build | |
| Main material | HAWA |
Questions about this item
What thread size does the 10-32 male end of this Legris 3169 elbow require for mounting?
The male thread is a #10-32 UNF connection that threads directly into a matching female port; no additional adapters are needed.
How do you install the push-to-connect side on the 4 mm tube, and what step is often missed?
Cut the tube square, push it firmly into the 5/32 in port until it seats, then pull back to confirm the collet has locked; skipping the pull test leaves an unsecured joint.
When should the fiberglass-reinforced nylon fitting be replaced based on its 290 psi and 175 °F ratings?
Replace the fitting if system pressure approaches 290 psi, temperature nears 175 °F, or the body shows cracking, discoloration, or thread sealant breakdown.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris
Legris 3104 10 00 Push-Fit Tee Fitting 10mm Brass
- Drain Components
- Black
$89.99
0.00109605BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017039BTC
In stock
Red Hat
Red Hat 8040H008 3/8 in 120V AC Solenoid Valve Trap
- Drain Components
$90.99
0.00110823BTC
In stock