Legris 3175 04 13 trap tube 5/32 pipe 1/4 PK10
Push-fit brass adapter joins 5/32 in tube to 1/4 in MBSPT thread, rated to 290 psi and 175 °F, pack of 10
- Product typeDrain Components
- Push-to-connect design speeds installation with 5/32 tube and 1/4 pipe
- Pre-applied thread sealant ensures leak-free MBSPT joints without extra tape
- Brass C36000 body handles 290 psi and 175 °F for reliable vacuum service
- Compact 1/4 in overall length fits tight automotive plumbing spaces
- Pack of 10 fittings covers multiple connection points in one purchase
Push-Fit Adapter for Vacuum Lines
This push-fit adapter joins 5/32 inch tube to a 1/4 inch male BSPT thread. The brass body uses C36000 grade material and includes pre-applied thread sealant. Rated for 290 psi and 175 degrees F. Supplied as a pack of ten fittings.
Suits vacuum systems needing this exact tube
Builders working with different tube diameters or thread types must select another fitting. Applications exceeding the stated pressure or temperature limits require alternative components. Not intended for potable water or gas distribution.
5/32 inch tube to 1/4 inch MBSPT connection
The Side A push-to-connect port accepts 5/32 inch outer diameter tube. Side B provides a 1/4 inch male BSPT thread. This specific size pairing determines whether the adapter fits the intended vacuum circuit.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $45.99
- Pricier than about 60% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3175 04 13 |
| Product type | Drain Components |
Questions about this item
How do I install the 1/4 in MBSPT end and what is the common mistake?
Apply PTFE tape to the 1/4 in MBSPT threads, hand-tighten, then turn one to two full turns with a wrench; the common mistake is over-tightening and cracking the brass body.
What maintenance or replacement will the push-to-connect end need later?
Inspect the collet and internal O-ring annually; if the 5/32 in tube shows scoring or the fitting weeps at 290 psi, replace the fitting.
Which limit appears first during sustained use at the 175 Degrees F rating?
The pre-applied thread sealant on the 1/4 in MBSPT side degrades before the brass body, so re-seal or replace the fitting when leaks develop at temperature.
More in Drain Stoppers, Strainers & Traps
Similar items
Zoeller
Zoeller 30-0101 Check Valve with Ball Valve and Union trap
- Drain Components
$45.99
0.00056174BTC
In stock
Legris
Legris 3148 04 11 Threaded Y Male 5/32 in OD PSI 290 PK10 trap
- Drain Components
- HAWA
$45.99
0.00056174BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017088BTC
In stock