Legris 3175 06 11 Push-Fit Fitting 6mm Brass 10 PK
A pack of ten brass push-fit fittings for 6 mm tube with 1/8 in male NPT threads, rated to 290 psi and 175 °F
- Product typeDrain Components
- Push-to-connect design speeds installation with 6 mm tube size
- Brass C36000 body resists corrosion at 290 psi maximum pressure
- Pre-applied thread sealant on 1/8 in MNPT side ensures leak-free seal
- Rated to 175 °F for reliable vacuum and fluid service
- Ten fittings per pack cover multiple connection points
6 mm push-fit fitting for vacuum lines
This pack contains ten brass push-to-connect fittings with a 6 mm tube outer diameter and a 1/8 in male pipe thread on the opposite side. They suit pneumatic or vacuum circuits where quick, tool-free assembly is required. The C36000 brass body includes pre-applied thread sealant for immediate sealing.
Rated to 290 psi and 175 °F in service
The fitting withstands a maximum operating pressure of 290 psi and a maximum operating temperature of 175 degrees Fahrenheit. Brass construction resists corrosion in typical shop environments. No moving parts or seals beyond the collet and O-ring mean silent operation and negligible pressure drop.
Male thread seals without extra tape
The 1/8 in MNPT end carries pre-applied sealant, so installers can thread directly into a port without PTFE tape or paste. The push-to-connect side accepts 6 mm tubing and releases with a simple collet press. Ten pieces cover multiple connection points or provide spares for maintenance.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $41.99
- Pricier than about 58% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3175 06 11 |
| Product type | Drain Components |
Questions about this item
How do I install the 6 mm push-fit side and the 1/8 in MNPT thread, and what step is often missed?
Push the 6 mm tube straight in until it seats; for the 1/8 in MNPT side, tighten only until the pre-applied sealant engages — over-tightening strips the brass threads.
What maintenance or replacement will the brass C36000 fitting and its pre-applied sealant need later?
Inspect for dezincification or sealant breakdown after thermal cycles; replace the fitting if the 6 mm grip ring or threads show corrosion or leakage.
Which limit appears first during sustained use — the 290 psi pressure rating or the 175 °F temperature rating?
The 175 °F temperature limit is reached first in hot-fluid systems; exceeding it degrades the sealant and reduces the 290 psi pressure margin.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris
Legris 3114 04 10 Push-Fit Adapter Fitting 4mm 10 PK
- Drain Components
- HAWA
$41.99
0.0005081BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00016928BTC
In stock
Banjo
Banjo HB200SS 2" Barbed x MNPT 316 SS Hose Barb Trap
- Drain Components
- 316 Stainless Steel
$41.99
0.0005081BTC
In stock