We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass push-fit trap 12mm OD to 1/2 NPT pack of ten

Legris

Legris 3175 12 22 Push-Fit Trap 12mm OD x 1/2 NPT PK10

SKU CH-F2A5-P3EH0 MPN 3175

Push-fit brass trap connects 12 mm tube to 1/2 NPT thread, rated 290 psi at 175 °F, pack of ten

  • Product typeDrain Components
  • Main materialHAWA
  • Push-to-connect design speeds installation with 12 mm tube
  • Male NPT thread seals directly into 1/2 inch ports
  • Brass C36000 body handles 290 psi at 175 °F
  • Pre-applied thread sealant cuts assembly time per joint
  • Pack of 10 fittings covers multiple connection points

Push-Fit Drain Fitting

This push-fit drain fitting connects 12 mm outer-diameter tubing to a 1/2 NPT male thread. It is made from C36000 brass and includes pre-applied thread sealant for faster installation. The fitting suits vacuum applications and is supplied in a pack of ten units.

Suits Direct Vacuum Connections

Installers who need a quick, tool-free seal on 12 mm tube will find this fitting convenient. It is not intended for builders who require a different tube diameter, a female thread, or a fitting rated beyond 290 psi at 175 °F. Buyers needing other configurations should select an alternative part.

12 mm Push-to-Connect by 1/2 NPT

The critical specification is the combination of a 12 mm push-to-connect end and a 1/2 NPT male thread. This exact interface match determines whether the fitting integrates with the existing plumbing layout. Verify both connection types before ordering.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $70.99
Pricier than about 71% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameLegris
Model name3175 12 22
Product typeDrain Components
Size & build
Main materialHAWA

Questions about this item

How do I install the 12 mm push-fit side and the 1/2 NPT thread without leaks?

Push the 12 mm tube firmly into the fitting until it seats; thread the 1/2 NPT end into the port using the pre-applied sealant — do not add tape or paste, which can prevent a proper seal.

What maintenance will the brass body and pre-applied sealant need over time?

Inspect the connection periodically for seepage; if the sealant dries out or the joint is disturbed, remove old sealant and apply fresh thread sealant before re-assembly.

At what temperature does the 290 psi pressure rating become unsafe during continuous operation?

The 290 psi maximum operating pressure is rated up to 175 °F; sustained use above that temperature reduces the safe pressure limit.

More in Drain Stoppers, Strainers & Traps

Similar items