Legris 3182 10 00 Push-Fit Elbow Trap 10mm
A push-fit elbow trap connects 10 mm tubing at a 90-degree angle, rated for 290 psi and 176 °F
- Product typeDrain Components
- Product colorBlack
- Push-fit connection speeds up installation on 10 mm tubing
- Fibreglass-reinforced nylon body withstands 290 psi operating pressure
- Rated for 176 °F maximum temperature in air systems
- Compact 39 mm overall length fits tight routing spaces
- Black finish identifies the fitting in mixed assemblies
Push-Fit Elbow Fitting 10 mm
The Legris 3182 10 00 is a push-fit elbow fitting designed for 10 mm tube outer diameter on both connection ends. It uses fiberglass-reinforced nylon construction with a push-to-connect side and a tube stem side. The black component suits pneumatic circuits requiring a 90-degree directional change.
Suits Installers Building Air Lines
This fitting suits technicians assembling compressed-air lines where a compact 39 mm elbow is needed and 290 psi operating pressure covers the system demand. It is not for installers needing threaded connections, higher temperature ratings above 176 degrees F, or larger tube diameters.
Quick Push-Fit Installation
Installation is completed by pushing the tube into the fitting until it seats, with no tools or separate sealant required because none is pre-applied. The main issue occurs if the tube is not cut square or inserted fully, which can cause leaks at the rated pressure.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $37.99
- Pricier than about 55% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3182 10 00 |
| Product type | Drain Components |
| Product color | Black |
Questions about this item
What tube size must I already have to connect the 10 mm push-fit ends?
You need 10 mm outer-diameter tubing on both sides; the fitting accepts 10 mm push-to-connect on one end and a 10 mm tube stem on the other.
Will the fiberglass-reinforced nylon body handle the same 290 psi pressure as my existing metal fittings?
Yes, the elbow is rated for a maximum operating pressure of 290 psi, matching typical metal push-fit components in compressed-air systems.
How can I confirm the joint is sealed after pushing the tubing in?
Pull gently on each tube; a secure connection will not release, and no air should escape at the 290 psi working pressure.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris
Legris 3140 56 00 Push-Fit Wye Fitting 1/4 in Brass
- Drain Components
- HAWA
$37.99
0.00045929BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00016913BTC
In stock
Dayton
Dayton 3ZN36 Rigid Shaft Coupling Trap 1.85 in OD 4000 RPM 2600 in-lb
- Drain Components
$37.99
0.00045929BTC
In stock