Legris 3193 08 13 Male Run Tee 8 mm 1/4 BSPP PK10
Push-fit male run tee connects two 8 mm tubes to a 1/4 BSPP thread, supplied in a pack of 10
- Product typeDrain Components
- Product colorBlack
- Push-to-connect ends speed up air-line assembly
- Male BSPP branch threads directly into 1/4 in ports
- Fibre-reinforced nylon body resists cutting-fluid exposure
- Black finish identifies the fitting in busy pipe runs
- Pack of ten covers multiple connection points
8 mm Push-Fit Tee with 1/4 BSPP Branch
This Legris 3193 fitting joins two 8 mm tubes and a 1/4 inch BSPP threaded port in a male run tee configuration. The body is moulded from black fiberglass-reinforced nylon for chemical resistance with air, cutting fluids and inert gases. Push-to-connect ends allow tool-free assembly on both tube sides. Supplied in a pack of 10 pieces.
Suits pneumatic and fluid circuits needing
Installers who require a different thread standard, a larger tube diameter or an all-push-fit tee without a threaded branch should select another fitting. Systems that demand metal bodies or higher pressure ratings than reinforced nylon provides are not served by this part.
8 mm tube and 1/4 BSPP thread combination
The critical specification is the mixed connection set: two 8 mm push-fit ports and one 1/4 inch male BSPP thread. Verify that both tube lines use 8 mm outer diameter and that the mating port accepts a 1/4 BSPP male thread before ordering.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $63.99
- Pricier than about 68% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3193 08 13 |
| Product type | Drain Components |
| Product color | Black |
Questions about this item
What tube diameter fits the two push-to-connect ends of this tee?
Both push-to-connect ports accept 8 mm outer-diameter tubing, giving a straight run through the tee with a threaded branch.
How do I seal the 1/4 BSPP threaded branch when installing it?
The 1/4 BSPP male thread does not come with pre-applied sealant, so apply PTFE tape or a suitable thread sealant before tightening into the female port.
What replacement part matches this fitting if the nylon body cracks?
Order another Legris 3193 08 13 male run tee; the pack of ten ensures spares are on hand for future maintenance.
More in Drain Stoppers, Strainers & Traps
Similar items
Viega 79285 Bronze Press-Fit 2in MNPT 1 1/2in Trap
- Drain Components
- HAWA
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
HAYWARD POOL PRODUCTS INC BFAS1030CES 3" Bulkhead Fitting Trap
- Drain Components
- HAWA





