Legris 3198 06 10 Push-Fit Tee Fitting 6mm
Push-fit tee fitting connects two 6 mm tubes and a 1/8 in MBSPP thread for air, cutting fluids or inert gases
- Product typeDrain Components
- Main materialHAWA
- Product colorBlack
- Push-fit connections speed installation without tools
- Fiberglass-reinforced nylon resists impact and chemicals
- Pre-applied thread sealant prevents leaks on the 1/8 in BSPP branch
- Compact tee splits flow between two 6 mm tube ports
- Suitable for air, cutting fluids and inert gases
Push-Fit Tee for 6 mm Tubing
The Legris 3198 06 10 tee fitting joins two 6 mm outer-diameter tubes and a 1/8 inch MBSPP port using push-to-connect ends. It is suited to air, cutting-fluid and inert-gas lines where quick assembly matters.
Fiberglass-Reinforced Nylon Body
The black fitting uses a fiberglass-reinforced nylon construction that resists corrosion and vibration in workshop environments. No thread sealant is pre-applied on the MBSPP side, so installers must add their own sealant or tape before tightening.
MBSPP Thread Requires Sealant
The 1/8 inch MBSPP connection relies on the installer to supply compatible thread sealant, limiting use to applications where that step is practical. Systems needing a sealed port without extra materials will need a different fitting style.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $46.99
- Pricier than about 61% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3198 06 10 |
| Product type | Drain Components |
| Product color | Black |
| Size & build | |
| Main material | HAWA |
Questions about this item
What is the push-to-connect tube size and the threaded port size on this tee?
The push-to-connect ends accept 6 mm tube outer diameter and the threaded end is a 1/8 in MBSPP port.
What tube outer diameter and thread size must the mating parts have to fit this fitting?
Mating tubes must be 6 mm outer diameter and the mating port must be a 1/8 in BSPP female thread.
How is the threaded end sealed during installation and what common mistake should be avoided?
The 1/8 in MBSPP thread requires a separate sealing washer or O-ring; do not rely on thread tape alone and do not overtighten the plastic body.
More in Drain Stoppers, Strainers & Traps
Similar items
HAYWARD POOL PRODUCTS INC
HAYWARD POOL PRODUCTS INC BFAS1015TFS 1-1/2" Bulkhead Fitting FNPT x FNPT trap
- Drain Components
- HAWA
$46.99
0.00058062BTC
In stock
