Legris 3199 04 10 Male Elbow 4mm OD 290 PSI trap
Connects 4 mm tubing to a 1/8 in MBSPP port at up to 290 psi and 175 °F
- Product typeDrain Components
- Push-to-connect 4 mm tube for quick installation
- Male BSPP 1/8 in thread seals without extra sealant
- Fiberglass-reinforced nylon body resists corrosion and vibration
- Rated to 290 psi for reliable pneumatic service
- Operates up to 175 °F in demanding environments
Push-Fit Elbow for 4 mm Tube
This Legris 3199 04 10 male elbow connects 4 mm outer-diameter tubing to a 1/8 inch MBSPP thread using a push-to-connect design. The fitting body is made from black fiberglass-reinforced nylon and is rated for a maximum operating pressure of 290 psi and a maximum operating temperature of 175 degrees Fahrenheit. It is supplied new in a pack of ten pieces.
Suits Pneumatic and Vacuum Lines
The elbow is intended for vacuum applications and low-pressure pneumatic circuits that use 4 mm push-fit tubing and require a compact 90-degree turn onto a male thread. It will not suit systems that demand metal-bodied fittings, higher pressure ratings, larger tube diameters, or different thread standards such as NPT or metric parallel threads.
290 psi Pressure Rating Decides Fit
The single specification that determines suitability is the 290 psi maximum operating pressure combined with the 4 mm tube size and 1/8 inch MBSPP thread. Verify that your system pressure stays below this limit and that the thread and tube dimensions match exactly before installation.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $37.99
- Pricier than about 55% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3199 04 10 |
| Product type | Drain Components |
Questions about this item
How much heat can the Legris 3199 04 10 elbow handle during continuous operation?
The fitting is rated for a maximum operating temperature of 175 Degrees F, so it will withstand typical compressed-air or vacuum line heat in continuous use.
What tube size and thread do I need on hand to install this push-fit elbow?
You need 4 mm outer-diameter tubing for the push-to-connect side and a female 1/8 in BSPP port for the male-threaded side.
Will the 290 psi rating of this elbow work with my older low-pressure pneumatic fittings?
Yes, the 290 psi maximum operating pressure exceeds typical low-pressure system requirements, so it is compatible with older components rated at lower pressures.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris
Legris 3140 56 00 Push-Fit Wye Fitting 1/4 in Brass
- Drain Components
- HAWA
$37.99
0.00046271BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017039BTC
In stock
Dayton
Dayton 3ZN36 Rigid Shaft Coupling Trap 1.85 in OD 4000 RPM 2600 in-lb
- Drain Components
$37.99
0.00046271BTC
In stock