Legris 3199 06 10 Male Elbow 6mm OD 290 PSI Trap
A push-fit male elbow connects 6 mm tubing to a 1/8 in MBSPP thread at up to 290 psi and 175 °F
- Product typeDrain Components
- Main materialPlastic/Metal Combination
- Product colorBlack
- Push-to-connect elbow joins 6 mm tube to 1/8 in MBSPP thread
- Fiberglass-reinforced nylon body withstands 290 psi operating pressure
- Rated for continuous use up to 175 °F in vacuum systems
- Black finish identifies the fitting in complex plumbing layouts
- Pre-assembled pack of ten speeds up multi-point installations
Male Elbow 6 mm OD 290 PSI
The Legris 3199 06 10 is a push-fit elbow fitting with a 6 mm tube outer diameter on one side and a 1/8 inch MBSPP thread on the other. It suits pneumatic or vacuum lines that need a compact 90-degree turn in automotive or light industrial plumbing.
Check thread size and tube diameter
Verify that the mating port accepts a 1/8 inch MBSPP thread and that the tubing measures 6 mm outer diameter. The fitting body is fibre-glass reinforced nylon rated for 290 psi maximum operating pressure and 175 degrees F maximum operating temperature.
Sustained pressure and temperature holding
Under continuous load the reinforced nylon body maintains seal integrity up to the rated 290 psi and 175 degrees F without creep. The push-to-connect end grips the tube securely while the male thread seals against the port during extended duty cycles.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $48.99
- Pricier than about 62% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3199 06 10 |
| Product type | Drain Components |
| Product color | Black |
| Size & build | |
| Main material | Plastic/Metal Combination |
Questions about this item
What tube size and thread does the Legris 3199 06 10 elbow connect?
It joins a 6 mm push-fit tube to a 1/8 in MBSPP male thread, both included in the fitting.
How do I decide between the listed versions for this fitting?
The part number 3199 06 10 specifies a single 6 mm by 1/8 in configuration; choose it when that exact tube and thread combination is required.
What does the 290 psi rating mean when the elbow is installed?
The system pressure must not exceed 290 psi at up to 175 °F for reliable sealing.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris 3107 08 00 Push-Fit Cross Fitting 5/16 in Brass/Nylon PK10
- Drain Components
- HAWA
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Fernco Inc. TST-4 4 in flexible plastic tap saddle tee trap
- Drain Components





