Legris 3199 06 60 Male Elbow 6 mm 10 mm
Push-fit elbow connects 6 mm tubing to a 10 mm male metric thread, rated to 290 psi and 175 °F in black fiberglass-reinforced nylon
- Product typeDrain Components
- Product colorBlack
- Push-to-connect 6 mm tube for quick vacuum line assembly
- Male 10 mm metric thread secures directly into port
- Fibreglass-reinforced nylon body resists heat up to 175 °F
- Rated to 290 psi for reliable low-pressure sealing
- Supplied in a pack of 10 for multiple connection points
Fitting for 6 mm and 10 mm Connections
This Legris push-fit elbow joins a 6 mm tube to a 10 mm male metric thread. The fiberglass-reinforced nylon body is coloured black and suits vacuum applications. Supplied as a pack of ten, it is aimed at installers who need a compact directional change in pneumatic or fluid systems.
Pressure and Temperature Limits
The fitting is rated for a maximum operating pressure of 290 psi and a maximum operating temperature of 175 degrees F. No pre-applied thread sealant is included, so the installer must apply a compatible sealant to the male thread before assembly. Normal use stays within these published limits.
Behaviour Under Sustained Load
Under continuous pressure and temperature the reinforced nylon maintains its shape without creep that would loosen the push-to-connect grip. The material resists degradation from prolonged exposure to the rated maximums, so the joint remains sealed during extended duty cycles.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $75.99
- Pricier than about 72% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3199 06 60 |
| Product type | Drain Components |
| Product color | Black |
Questions about this item
How is the 6 mm push-fit side installed, and what step is often missed?
Push the 6 mm tube into the fitting until it seats firmly; the common miss is not pushing far enough past the grab ring to achieve a full seal.
What maintenance or replacement will the fiberglass-reinforced nylon elbow need over time?
Inspect the O-ring and collet for wear or cracking during routine system checks; replace the fitting if the push-fit grip loosens or leaks appear.
Which limit appears first during sustained use — the 290 psi pressure rating or the 175 °F temperature rating?
The 175 °F temperature ceiling is usually reached before the 290 psi pressure limit in continuous hot-fluid service.
More in Drain Stoppers, Strainers & Traps
Similar items
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00016951BTC
In stock
Zoro Select
Zoro Select 3" MNPT x 8" TBE Red Brass Nipple Sch 40
- Transparent
$75.99
0.00092072BTC
In stock