We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit elbow fitting with 10mm tube end and 1/2 inch male thread

Legris

Legris 3199 10 21 Male Elbow 10mm OD 290 PSI

SKU CH-Z55A-MXG0P MPN 3199

A push-fit elbow connects 10 mm tube to a 1/2 in MBSPP thread at up to 290 psi and 175 °F

  • Product typeDrain Components
  • Main materialHAWA
  • Product colorBlack
  • Push-fit elbow enables quick tube installation
  • 10 mm outer diameter suits metric tubing
  • 1/2 inch BSPP male thread connects to female ports
  • Fiberglass-reinforced nylon withstands 290 psi pressure
  • Rated to 175 °F for hot-fluid service

10 mm Push-Fit Male Elbow

This Legris 3199 fitting connects a 10 mm outer-diameter tube to a 1/2 in MBSPP port at a 90-degree angle. The glass-fibre reinforced nylon body handles vacuum service and pressures up to 290 psi. It is supplied in a pack of ten pieces.

Suits pneumatic or vacuum lines needing a compact

Installers who require a female thread, a different tube diameter, or a metal-bodied fitting should select an alternative part. The fitting is not intended for temperatures above 175 °F.

Maximum operating pressure 290 psi

System pressure must stay at or below this value to avoid leakage or fitting failure. The 175 °F temperature ceiling applies equally. Verify both limits before installation.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $58.99
Pricier than about 66% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameLegris
Model name3199 10 21
Product typeDrain Components
Product colorBlack
Size & build
Main materialHAWA

Questions about this item

How often should the fiberglass-reinforced nylon body be inspected or replaced?

The fitting is a single-piece push-fit elbow with no serviceable internals; replace it only if you see cracking, thread damage or persistent leaks at the 10 mm or 1/2 in connections.

What pressure limit will be reached first during continuous operation?

The maximum operating pressure is 290 psi, so sustained system pressure must stay below that value to avoid exceeding the fitting's rating.

How hot does the fitting get when the system runs at 175 °F all day?

The fitting is rated for a maximum operating temperature of 175 °F; at that temperature the body will be at the fluid temperature, so plan for heat exposure accordingly.

More in Drain Stoppers, Strainers & Traps

Similar items