Legris 3601 10 21 10mm Tube x BSPP Nickel Brass Male Trap
Nickel-plated brass male connector joins 10 mm tube to 1/2 in BSPP thread, rated to 435 psi from -4 °F to 302 °F with a 24 mm hex
- Product typeDrain Components
- Nickel-plated brass resists corrosion in fluid systems
- 10 mm tube fits 13/32 in pipe for secure connections
- BSPP male thread seals at 1/2 in pipe size
- 435 psi rating handles high-pressure applications
- 24 mm hex allows standard tool tightening
Brass Male Connector for 10 mm Tube
The Legris 3601 10 21 connects a 10 mm tube to a 1/2 in BSPP thread using a nickel-plated brass body. It is rated for pressures up to 435 psi and operates between -4 °F and 302 °F. The fitting uses a 24 mm hex for installation.
Suits Pneumatic and Fluid Lines
This connector suits installers joining metric tubing to BSPP ports in compressed-air, water or oil circuits where the pressure and temperature ratings match the application. It does not suit systems requiring push-to-connect ends, larger tube diameters or threads other than 1/2 in BSPP.
Tube Size 10 mm and 1/2 in BSPP Thread
The single specification that decides fit is the combination of a 10 mm tube end and a 1/2 in BSPP male thread. If the tubing or port differs from these dimensions, the connector will not seal.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 78% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3601 10 21 |
| Product type | Drain Components |
Questions about this item
At what pressure will the 10mm tube connection reach its limit during continuous operation?
The fitting is rated for a maximum of 435 psi, so sustained use above that pressure exceeds its design limit.
How much heat can the nickel-plated brass body handle when the system runs all day?
The material is rated from -4 to 302 degrees Fahrenheit, covering continuous high-temperature operation.
Which thread size must the mating port have for the BSPP male end to seal properly?
The male connector uses a 1/2 inch BSPP thread, so the receiving port must match that size.
More in Drain Stoppers, Strainers & Traps
Similar items
As Seen On TV
As Seen On TV DJAP0006 Pipe Blaster 30 psi drain trap
- ABS Plastic
- Green
$12.99
0.0001594BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017167BTC
In stock